
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

IR sensor is an open-source printed circuit board by RUDRA-ani, from the RUDRA-ani/IR-sensor repository on GitHub. It is a 2-layer board of 52 × 21 mm with 9 parts on 8 nets, routed with 38 tracks and 0 vias.
It is built around the LM358. Its parts include 3 resistors, 3 diodes, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | LED | LED_THT:LED_D5.0mm_Horizontal_O3.81mm_Z3.0mm | D1, D2 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3266Z_Horizontal | RV1 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm_SMDSocket_SmallPads | U1 |

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen


starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

It measures 52 × 21 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RUDRA-ani/IR-sensor repository on GitHub, at the commit this page was made from: the board is IR_sensor.kicad_pcb and its schematic IR_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RUDRA-ani before reusing the design.