Skip to the content
2 layers32 × 75 mmVexQwiic, the printed circuit board in 3D

This project aims to create a board that breaks out a smart port to both Qwiic Connector (I2C) and Mikrobus, for additional expansion to the V5 ecosystem.

Size
32 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
30
Pads
88
Tracks, vias
118, 12
Pours
7
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Oct 2024
Updated
29 Oct 2024

Overview

VexQwiic is an open-source printed circuit board by RIT-VEX-U, from the RIT-VEX-U/VexIfaceExpander repository on GitHub. It is a 2-layer board of 32 × 75 mm with 21 parts on 30 nets, routed with 118 tracks and 12 vias.

It is built around the ADM3493ARZ. Its parts include 6 capacitors, 3 resistors, 3 ICs, 3 diodes and 2 connectors. It belongs with the RP2350 and AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Vex Interface Expansion Board

This project aims to create a board that breaks out a smart port to both Qwiic Connector (I2C) and Mikrobus, for additional expansion to the V5 ecosystem.

This project is a work in progress and is not ready for testing yet.

3d model

schematic

pcb

Parts

21
QtyValueFootprintReferences
310uFCapacitor_SMD:C_0603_1608MetricC1, C2, C6
222uFCapacitor_SMD:C_0603_1608MetricC4, C5
2D_TVSDiode_SMD:D_SMA_HandsolderingD1, D2
2LOGOLOGOG***, G***
1100nFCapacitor_SMD:C_0603_1608MetricC3
110kResistor_SMD:R_0603_1608MetricR2
1120Resistor_SMD:R_0603_1608MetricR3
13.3uHpcb:BWVS00505040L1
156.2kResistor_SMD:R_0603_1608MetricR1
1ADM3493ARZpcb:SOIC127P600X175-8NU5
1D_SchottkyDiode_SMD:D_SOD-323_HandSolderingD3
1MIKROBUS_HOST_CONNmikroBUS:MIKROBUS_HOST_CONNCON1
1RJ9pcb:RJ9_JackCONN1
1Screw_Terminal_3.5mm_2SparkFun-Connector:Screw_Terminal_3.5mm-2J1
1Sparkfun-ProMicroRP2350Sparkfun-ProMicro2350:Sparkfun-ProMicro2350U1
1TPS563200Package_TO_SOT_SMD:SOT-23-6U3

Similar boards

  • 2 layers30 × 60 mmVex Debug, the printed circuit board in 3D

    Vex Debug

    RIT-VEX-U/VexDebugBoard_PCB

    This is the main hardware repository for the V5 Debug Board: a board designed to slot into the VEX V5 Smart Port, and transmit debug data over a websocket to a laptop.

    41 parts1GPL-3.0
  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT

Questions

How big is the VexQwiic PCB?

It measures 32 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the VexQwiic use?

21 parts, built around the ADM3493ARZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VexQwiic KiCad files?

From the RIT-VEX-U/VexIfaceExpander repository on GitHub, at the commit this page was made from: the board is VexQwiic.kicad_pcb and its schematic VexQwiic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the VexQwiic design in my own project?

Its repository states no licence, so its author keeps all rights: ask RIT-VEX-U before reusing the design.