2 layers68.6 × 53.3 mm
Mspduino
RIOT-OS/RIOT-Open-Hardware
Free Libre Open Source Hardware (FLOSH) Designed & Published by RIOTers
13 parts1
2 layers79.5 × 58.4 mm
Testing shield
RIOT-OS/RIOT-Open-Hardware1Free Libre Open Source Hardware (FLOSH) Designed & Published by RIOTers
- Size
- 79.5 × 58.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 44
- Pads
- 143
- Tracks, vias
- 292, 137
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Nov 2023
- Updated
- 16 Dec 2023
Overview
Testing shield is an open-source printed circuit board by RIOT-OS, from the RIOT-OS/RIOT-Open-Hardware repository on GitHub. It is a 2-layer board of 79.5 × 58.4 mm with 28 parts on 44 nets, routed with 292 tracks and 137 vias.
It is built around the PCF8574T, DSHP05TSGER and K3-2235S-L1. Its parts include 10 resistors, 7 connectors, 3 switches, 2 capacitors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
PCF8574T
SOP-16-300mil-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascading and address extension、Built-in LED driver I2C Interrupt Output Open-drain SOP-16-300mil I/O Expanders ROHSHGSEMII/O Expanders
DSHP05TSGER
SMD,P=1.27mm-30℃~+85℃ 1.27mm 24V 25mA 3,000 Cycles 5 Black SPST SMD,P=1.27mm DIP Switches ROHSkangshenDIP Switches
K3-2235S-L1
SMD,9x3.5mm-25℃~+80℃ 10000 times 3.5mm 3.5mm 300mA 6V 9mm Black DPDT Gull Wing Rectangular Columnar Surface Mount,Vertical SMD,9x3.5mm Slide Switches ROHSHRO ElectronicsSlide Switches
README
olimex-msp430-arduino-uno/README.mdArduino UNO adapter for Olimex MSP430 Header boards
Older MSP430 MCUs can also be obtained in DIP packages, making them extremely breadboard friendly. The newer high-pin count MSP430 MCUs however are only available in SMD packages. To still enable breadboard prototyping with those MCUs, Olimex Ltd sells open hardware MSP430 breakout boards named MSP430 Header Boards.
This adapter board can be useful to quickly connect an Arduino UNO compatible shield to such a header board and/or to connect an USB-UART adapter without having to use jumper wires.
The board has been developed for the Olimex MSP430-H1611 but also been tested successfully with the Olimex MSP430-H2618. Chances are good that it will work with many of the Olimex MSP430 header boards with the same footprint.
Features
- Adapter for Arduino UNO shields
- Integrated UART <--> USB bridge
- Physical reset button
- External resistor for DCO clock source ($R_{OSC}$ in the data sheet)
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 20K | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R6, R8 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R3, R5, R7 |
| 2 | 100 nF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 1 | ADDR0 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | ADDR1 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | ADDR2 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP3 |
| 1 | Arduino_Uno_R3_Shield | Custom Footprints:Arduino_Uno_R3_Shield | XA1 |
| 1 | DSHP05TSGER | Custom Footprints:SW-SMD_10P_DSHP05TSGET | SW1 |
| 1 | I2C Grove | Custom Footprints:grove_i2c | J1 |
| 1 | I2C Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | I2C Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | ISP SPI | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | K3-2235S-L1 | Custom Footprints:SW-TH_K3-2235S-L1 | SW2 |
| 1 | PCF8574 | Custom Footprints:SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL-1 | U1 |
| 1 | RIOT-Logo | Custom Footprints:RIOT-Logo | G*** |
| 1 | Reset | Custom Footprints:SW-SMD_4P-L4.5-W4.5-P3.00-LS6.8 | SW3 |
| 1 | Side SPI | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | UART Grove | Custom Footprints:grove_uart | J7 |
| 1 | UART Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
More from RIOT-OS/RIOT-Open-Hardware
1Similar boards
- 2 layers82.6 × 79.5 mm
- 2 layers100 × 100 mm
- 2 layers100 × 45 mm
- 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 2 layers139.7 × 88.9 mm
- 2 layers83 × 35 mm
- 2 layers45.7 × 67.3 mm
- 2 layers65 × 120 mm
Nomad
0Zane/Nomad
One Adventure - One device,Nomad is a custom outdoor mobile device built around the ESP32-S3. It is designed for explorers, researchers, and outdoor enthusiasts who need reliable positioning, long-range communication…
81 parts17MIT
Questions
How big is the Testing shield PCB?
It measures 79.5 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Testing shield use?
28 parts, built around the PCF8574T, DSHP05TSGER and K3-2235S-L1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Testing shield KiCad files?
From the RIOT-OS/RIOT-Open-Hardware repository on GitHub, at the commit this page was made from: the board is selftesting-shield/smd-variant/testing-shield.kicad_pcb and its schematic olimex-msp430-arduino-uno/mspduino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Testing shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask RIOT-OS before reusing the design.