
Stm32mp1-custom devboard
voloviq/stm32mp1-custom-devboard
Custom development board for stm32mp1-visionsom from Somlabs

Usb resistor is an open-source printed circuit board by R-Mutura, from the R-Mutura/stm32_switching repository on GitHub. It is a 4-layer board of 126.7 × 135.4 mm with 43 parts on 22 nets.
It is built around the IP4220CZ6,125-JSM and PESD3V3L5UY. Its parts include 20 capacitors, 6 resistors, 4 diodes, 2 connectors and 1 IC. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 4 | Mounting Hole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | W1, W2, W3, W4 |
| 3 | 1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C29, C30, C38 |
| 3 | 2.2uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6, C21 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
| 2 | 22pf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 2 | GND_TP | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | GTP1, GTP2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 24mhz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 3k 1% | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R22 |
| 1 | 4.7uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C18 |
| 1 | IP4220CZ6_125 | Package_SO:SC-74-6_1.5x2.9mm_P0.95mm | D4 |
| 1 | MAIN_RST | Buttons_Switches_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | Main BOOT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BOOT1 |
| 1 | Main_FB | Inductors_SMD:L_0805_HandSoldering | L2 |
| 1 | PESD3V3L5UY | Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering | D6 |
| 1 | POW_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | STM32F723ZETx | Package_QFP:LQFP-144_20x20mm_P0.5mm_handsolder | U4 |
| 1 | SWD | Socket_Strips:Socket_Strip_Straight_1x06 | P2 |
| 1 | USB_C_Receptacle | custom_footprints:Wurth-632723300011-HandSoldering-Renum | J1 |
| 1 | USER_LED | LED_THT:LED_D5.0mm | D3 |

voloviq/stm32mp1-custom-devboard
Custom development board for stm32mp1-visionsom from Somlabs



Zychlix/Inverter32
An open source, open hardware plug'n'play 3 phase motor inverter design. It

incend1um3/USB-C-PD-Reflow-Plate
300W PCB Reflow Plate with USB-C PD Support


nicholasshort/GuitarFX
This is a digital guitar effects pedal designed as a generic DSP platform. I've written simple algorithms such as volume and tone control, however plans are in the works for others: namely hard and soft clipping…

It measures 126.7 × 135.4 mm and has 4 copper layers, 1.6 mm thick.
43 parts, built around the IP4220CZ6,125-JSM and PESD3V3L5UY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the R-Mutura/stm32_switching repository on GitHub, at the commit this page was made from: the board is assets/pcb/usb_resistor.kicad_pcb and its schematic assets/ideal_ckt/ideal_ckt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask R-Mutura before reusing the design.