4 layers50.1 × 41 mm
4 layers102 × 86.2 mm
ELIESTER V2
R-Mutura/ELISTARSELISTARS - IDUSTRIAL GRADE PCB DESIGN WITH ESP32 SOC
- Size
- 102 × 86.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 312
- Nets
- 274
- Pads
- 962
- Tracks, vias
- 2,992, 668
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 Jul 2023
- Updated
- 29 Jul 2023
Overview
ELIESTER V2 is an open-source printed circuit board by R-Mutura, from the R-Mutura/ELISTARS repository on GitHub. It is a 4-layer board of 102 × 86.2 mm with 312 parts on 274 nets, routed with 2,992 tracks and 668 vias.
It is built around the TBU-CA065-200-WH, WAS3157B-6/TR and B5819W, with the DMP3056L-7, PESD1CAN,215-ES and BSN20 among its other parts. Its parts include 87 capacitors, 70 resistors, 15 diodes, 13 ICs and 10 inductors.
Main components
12
TBU-CA065-200-WH
SMD,6.5x4mm-55℃~+125℃ 0.9mm 1 16V 300V 300mA 4mm 6.5mm 9.8Ω Surface Mount SMD,6.5x4mm Surge Protection Devices (SPDs) ROHSBournsSurge Protection Devices (SPDs)
WAS3157B-6/TR
SOT-363-40℃~+85℃ 1 18.5pF 2.3V~5.5V 2:1 300ps 400MHz 5.5Ω 50ns 80ns SOT-363 Analog Switches, Multiplexers ROHSWILLSEMIAnalog Switches, Multiplexers
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
DMP3056L-7
SOT-23-55℃~+150℃ 1 P-Channel 1.38W 11.8nC@10V 2.1V 30V 4.3A 70mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsPESD1CAN,215-ES
SOT-23ESD And Surge Protection (TVS/ESD)ElecSuperBSN20
SOT-23-55℃~+150℃ 1 N-channel 1.5V 17.5pF 2.4nC@10V 2.5Ω@10V 300mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHSSlkorMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
P0640TA
SMA150A 150mA 2.2A 4V 50pF 58V 5uA 77V SMA Semiconductor Discharge Tubes (TSS) ROHShongjiachengSemiconductor Discharge Tubes (TSS)SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
TLJA107M006R0800
CASE-A-3216-18(mm)-55℃~+125℃ 100uF 6.3V 800mΩ@100kHz ±20% CASE-A-3216-18(mm) Tantalum Capacitors ROHSKyocera AVXTantalum Capacitors
1206B102K202NT
12061nF 2kV X7R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMT
MDA5030-2R2M
SMD,5.7x5.2mm2.2uH 21.6mΩ 6.5A 7A Alloy integrated molding inductor ±20% SMD,5.7x5.2mm Molding Power Inductors ROHSKOHERelecInductors (SMD)
Parts
312| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18 +2 |
| 16 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C17, C18, C21, C37, C45, C50, C61, C62, C64, C65, C67, C69, C70, C71, C86 |
| 15 | 10K | Resistor_SMD:R_0402_1005Metric | R4, R17, R30, R35, R36, R38, R45, R47, R48, R49, R67, R68, R72, R74, R75 |
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C19, C20, C31, C32, C40, C44, C48, C80 |
| 9 | PC817 | MACHADA_footprints:pc817-DIP-4_W7.62mm_SMDSocket_SmallPads | U6, U7, U10, U11, U18, U20, U21, U22, U23 |
| 7 | 10u | Capacitor_SMD:C_0402_1005Metric | C9, C49, C51, C63, C68, C82, C83 |
| 7 | 220R | Resistor_SMD:R_0402_1005Metric | R14, R43, R50, R51, R52, R53, R54 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R7, R8, R10, R11, R12, R13 |
| 6 | 1u | Capacitor_SMD:C_0402_1005Metric | C5, C7, C8, C22, C81, C90 |
| 5 | Conn_01x04 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J3, J6, J7, J9, J10 |
| 5 | L_Ferrite | Inductor_SMD:L_0603_1608Metric | L1, L5, L6, L7, L8 |
| 5 | TestPoint | brilliant-kicad-library:TestPoint_Pad_D0.9mm | SIM_PWR1, TP_RX4, TP_TX4, TP1, TP2 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C26, C27, C43, C79 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R3, R18, R69, R76 |
| 4 | 49.9R | Resistor_SMD:R_0402_1005Metric | R19, R31, R32, R33 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C14, C72, C73 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R26, R59, R61 |
| 3 | 10R | Resistor_SMD:R_0402_1005Metric | R20, R42, R44 |
| 3 | 10n | Capacitor_SMD:C_0402_1005Metric | C55, C59, C91 |
| 3 | 10n | Capacitor_SMD:C_0603_1608Metric | C33, C41, C75 |
| 3 | 10u_35V | Capacitor_SMD:C_0603_1608Metric | C28, C29, C30 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C6, C66 |
| 3 | 22R | Resistor_SMD:R_0402_1005Metric | R70, R71, R73 |
| 3 | 22p | Capacitor_SMD:C_0402_1005Metric | C87, C88, C89 |
| 3 | 22u | Capacitor_SMD:C_0603_1608Metric | C46, C47, C78 |
| 3 | 47u | Capacitor_SMD:C_0603_1608Metric | C38, C39, C60 |
| 3 | B5819W | Diode_SMD:D_SOD-123 | D3, D4, D5 |
| 3 | DMP3056L-7 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q6 |
| 3 | ESDONCAN1LT1G | Package_TO_SOT_SMD:SOT-23 | D12, D13, D16 |
| 3 | FB_120 OHM 100MHz | Inductor_SMD:L_0603_1608Metric | L9, L10, L11 |
| 2 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | 100R | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | 16p | Capacitor_SMD:C_0402_1005Metric | C57, C58 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R58, R60 |
| 2 | 2.2K | Resistor_SMD:R_0603_1608Metric | R62, R63 |
| 2 | 2.2K | Resistor_SMD:R_0402_1005Metric | R2, R27 |
| 2 | 20R | Resistor_SMD:R_0402_1005Metric | R39, R64 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q9, Q10 |
| 2 | 330R | Resistor_SMD:R_0402_1005Metric | R34, R37 |
| 2 | 390R | Resistor_SMD:R_0402_1005Metric | R65, R66 |
| 2 | 4.7K | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12, C23 |
| 2 | 5V | brilliant-kicad-library:TestPoint_Pad_D0.9mm | TP3, TP4 |
| 2 | 6.8n | Capacitor_SMD:C_0402_1005Metric | C53, C54 |
| 2 | Antenna_Shield | greencharge-footprints:UFL_COAX_CONN23370191 | AE1, AE2 |
| 2 | BSN20 | Package_TO_SOT_SMD:SOT-23 | Q7, Q8 |
| 2 | G*** | kibuzzard-63CBB0EC | kibuzzard-63CBB0EC, kibuzzard-63CBB0EC |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | P0640TA | Diode_SMD:D_SMA | D14, D15 |
| 2 | PESD1CAN_215 | digikey-footprints:SOT-23-3 | D9, D10 |
| 2 | PWR | LED_SMD:LED_0603_1608Metric | D1, D11 |
| 2 | SS34 | Diode_SMD:D_SMA | D7, D8 |
| 2 | SW_Push | greencharge-footprints:tactile_sw_angled_1TS003B-1400-3500A-CT | SW2, SW3 |
| 2 | TBU-CA065-200-WH | MACHADA_footprints:TBU-CA065-200-WH | U13, U16 |
| 2 | WAS3157B | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1, U5 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R57 |
| 1 | 1.96K | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 10.2K | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 100mHz 150/200R | Inductor_SMD:L_0402_1005Metric | L13 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C25 |
| 1 | 100u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C84 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C24 |
| 1 | 10p | Capacitor_SMD:C_0603_1608Metric | C77 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 12.4K_1% | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | 12MHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 16.2K | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 169K | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R40 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C92 |
| 1 | 1nF_2KV | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C56 |
| 1 | 2.2n | Capacitor_SMD:C_0402_1005Metric | C35 |
| 1 | 2.2u | greencharge-footprints:MDA5030-100M | L12 |
| 1 | 22n | Capacitor_SMD:C_0402_1005Metric | C52 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 27V_BREAK_DOWN | Diode_SMD:D_SOD-123 | D17 |
The 242 most common of 312 parts.
Similar boards
- 4 layers85 × 50 mm
OpenHap
kenyattaejones32-boop/AQM
Open-source hardware design for OpenHAP, an ESP32-based air quality monitor with CO sensing, thermistor temperature input, USB-C charging, and cellular data upload.
269 parts - 6 layers150 × 90 mm
Gasmat Gateway
kenyattaejones32-boop/Gasmat_Gateway
KiCad 8 hardware design for the Gasmat Gateway board (Geviton).
287 parts - 4 layers58.5 × 72.5 mm
- 4 layers72.7 × 100 mm
Illuminator
VIPQualityPost/polarizer-illuminator
15W USB PD powered microscope illuminator with electrically controlled liquid crystal polarizer for removing specular reflections.
66 parts3 - 4 layers131 × 78.5 mm
- 4 layers55 × 55 mm
- 4 layers101.6 × 50.8 mm
Artnet dmx
leonardcroce/ArtNet-to-DMX-Converter
Hardware design files for an ArtNet to DMX converter based on STM32.
71 parts
Questions
How big is the ELIESTER V2 PCB?
It measures 102 × 86.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ELIESTER V2 use?
312 parts, built around the TBU-CA065-200-WH, WAS3157B-6/TR, B5819W and DMP3056L-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ELIESTER V2 KiCad files?
From the R-Mutura/ELISTARS repository on GitHub, at the commit this page was made from: the board is src/ELIESTER_V2/ELIESTER_V2.kicad_pcb and its schematic src/ELIESTER_V2/16BIT_ADC_ADS1115.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ELIESTER V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask R-Mutura before reusing the design.