

- Size
- 198.5 × 154 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 113
- Pads
- 303
- Tracks, vias
- 792, 88
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Feb 2025
- Updated
- 8 Apr 2025
Overview
Apr is an open-source printed circuit board by Projeto-Jupiter, from the Projeto-Jupiter/PCB_INSTRUMENTACAO repository on GitHub. It is a 2-layer board of 198.5 × 154 mm with 94 parts on 113 nets, routed with 792 tracks and 88 vias.
It is built around the IRLZ34N and UF4007-E3/73. Its parts include 37 connectors, 23 resistors, 12 diodes, 10 transistors and 3 ICs.
Main components
2Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3, J4, J5, J8, J9, J10, J11, J12, J20, J21, J22, J26 |
| 10 | 470 | Resistor_SMD:R_0805_2012Metric | R1, R15, R23, R24, R26, R27, R28, R29, R30, R31 |
| 10 | IRLZ34N | Package_TO_SOT_THT:TO-220-3_Vertical | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11 |
| 10 | LED | LED_THT:LED_D5.0mm | D2, D3, D5, D6, D7, D10, D17, D18, D19, D20 |
| 9 | 4K7 | Resistor_SMD:R_0805_2012Metric | R14, R18, R19, R20, R21, R32, R33, R34, R35 |
| 8 | UF4007-E3/73 | Diode_THT:D_DO-15_P15.24mm_Horizontal | CR1, CR2, CR3, CR4, CR5, CR6, CR7, CR8 |
| 4 | Conn_01x20_Pin | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J6, J7, J23, J24 |
| 3 | Screw_Terminal_01x02 | Library:Screw Terminal 3D | J25, J27, J28 |
| 3 | Screw_Terminal_01x03 | Library:KT100-3PIN | J1, J2, J30 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D4 |
| 2 | Conn_01x04 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J13, J14 |
| 2 | LORA | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J18, J19 |
| 2 | ~ | Library:hx711 | U1, U2 |
| 1 | 11 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J35 |
| 1 | 12 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J36 |
| 1 | 14 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J37 |
| 1 | 1uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 270k | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | 390k | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 5.6k | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | A1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J29 |
| 1 | A2 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J34 |
| 1 | Bateria Lipo | Library:Screw Terminal 3D | J33 |
| 1 | Bateria Lítio 1 | Library:Screw Terminal 3D | J16 |
| 1 | Bateria Lítio 2 | Library:Screw Terminal 3D | J17 |
| 1 | Bateria Lítio 3 | Library:Screw Terminal 3D | J31 |
| 1 | Buzzer | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J32 |
| 1 | Flash Module Conn | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J15 |
| 1 | LM7905_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
Similar boards
- 4 layers202.3 × 90 mm

- 2 layers100 × 50 mm

- 2 layers224.8 × 60.3 mm

Deurnode nieuw
Hans-Beerman/Deurnode_ESP32-PoE
KiCad design Deurnode for the MakerSpace Leiden, based on the Olimex ESP32-PoE
38 parts4Apache-2.0 - 2 layers111.3 × 68.1 mm

MKS relay v4
3D-Printing-for-Microfluidics/3D_printer_control
2nd generation 3D printer control software
67 parts3GPL-3.0 - 2 layers

Watch cleaner pcb
DavidJ-Saving-Time/watch-cleaner
So this is a very rough draft of code designed to run on an esp32 to control a watch cleaning machine see this YouTube video https://youtu.be/Opr75n8DbYY I'll be adding to this and making it easier for people to use.
16 parts3MIT - 2 layers31.8 × 114.8 mm

3DWelderPCB
destroyer796/3DWelder
An overbuilt 3D pen that will use a chc pro hotend and custom dc extruder powered by a power tool battery
17 parts3MIT - 2 layers83.8 × 50.8 mm

Shunt charge controller
grillbaer/solar-power-supply
Solar power harvesting for micro controller projects with li-Ion battery and highly efficient charge controller
16 parts3MIT - 2 layers80 × 45 mm

WifiOiler01
volw/wifiOiler
Automatic, distance depending chain oiler for motorbikes with track recording (GPS).
15 parts3GPL-3.0
Questions
How big is the Apr PCB?
It measures 198.5 × 154 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Apr use?
94 parts, built around the IRLZ34N and UF4007-E3/73. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Apr KiCad files?
From the Projeto-Jupiter/PCB_INSTRUMENTACAO repository on GitHub, at the commit this page was made from: the board is apr.kicad_pcb and its schematic apr.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Apr design in my own project?
Its repository states no licence, so its author keeps all rights: ask Projeto-Jupiter before reusing the design.