
Projeto Elétrico - Controle
Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

PCB for the active control of roll speed of Juninho
Controle PCB is an open-source printed circuit board by Projeto-Jupiter, from the Projeto-Jupiter/PCB-Control-Canards repository on GitHub. It is a 2-layer board of 65 × 45 mm with 7 parts on 112 nets, routed with 30 tracks and 0 vias.
Its parts include 5 connectors and 1 IC. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
PCB for the active control of roll speed of Juninho, Nyx and Ganímedes
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J1, J4 |
| 1 | Conn_01x02_Male | Jupiter:JS-1001-02 | J2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | LOGO | Jupiter:Logo_B | G*** |
| 1 | Teensy3.6_All_Pins | teensy:Teensy35_36_All_Pins | U1 |

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 65 × 45 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Projeto-Jupiter/PCB-Control-Canards repository on GitHub, at the commit this page was made from: the board is Controle-PCB/Controle-PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Projeto-Jupiter before reusing the design.