
Projeto Elétrico - Controle
Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

PCB for the active control of roll speed of Juninho
Controle PCB is an open-source printed circuit board by Projeto-Jupiter, from the Projeto-Jupiter/PCB-Control-Canards repository on GitHub. It is a 2-layer board of 65 × 45 mm with 5 parts on 33 nets, routed with 28 tracks and 0 vias.
Its parts include 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
PCB for the active control of roll speed of Juninho, Nyx and Ganímedes
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | GY-521-symbols | footprints:GY-521 | U2 |
| 1 | LOGO | Jupiter:Logo_B | G*** |

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho

Projeto-Jupiter/PCB-Control-Canards
PCB for the active control of roll speed of Juninho


joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
It measures 65 × 45 mm and has 2 copper layers, 1.6 mm thick.
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Projeto-Jupiter/PCB-Control-Canards repository on GitHub, at the commit this page was made from: the board is Controle-PCB-Arduino-SD/Controle-PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Projeto-Jupiter before reusing the design.