ProfeRimoldi/Proyecto_CanSATSistema electrónico para misión tipo CanSat desarrollado en la EEST N°4 I Brigada Aérea El Palomar, orientado al diseño, validación y documentación de hardware y firmware para sistemas embarcados aeroespaciales.
Earth Station is an open-source printed circuit board by ProfeRimoldi, from the ProfeRimoldi/Proyecto_CanSAT repository on GitHub. It is a 2-layer board of 100 × 80 mm with 70 parts on 75 nets, routed with 587 tracks and 46 vias.
It is built around the LM324AD, L7805 and SS34. Its parts include 15 resistors, 12 diodes, 12 connectors, 6 capacitors and 5 switches.
Sistema electrónico para misión tipo CanSat desarrollado en la EEST N°4 I Brigada Aérea El Palomar, orientado al diseño, validación y documentación de hardware y firmware para sistemas embarcados aeroespaciales.
Este repositorio centraliza el desarrollo de:
Proyecto_CanSAT/
├── hardware/
│ ├── Onboard_Comp/
│ │ ├── kicad/
│ │ ├── outputs/
│ │ │ └── Rev_A/
│ │ └── docs/
│ │
│ └── Earth_Station/
│ ├── kicad/
│ ├── outputs/
│ └── docs/
│
├── firmware/
│
├── docs/
│
└── README.mdComputadora principal embarcada encargada de:
Actualmente cuenta con:
Rev_APlaca de desarrollo para estación terrestre destinada a:
Actualmente cuenta con:
Rev_ADesarrollo basado en ESP32 para:
Actualmente cuenta con:
La estructura de firmware se encuentra en evolución y será versionada junto con las revisiones de hardware.
Las revisiones de fabricación se organizan mediante:
outputs/Rev_A/
outputs/Rev_B/
outputs/Rev_C/permitiendo trazabilidad completa entre:
Mantener una metodología de desarrollo profesional para proyectos electrónicos aeroespaciales, con trazabilidad completa de hardware, firmware y documentación técnica.
Damián Rimoldi Ingeniería Electrónica – UTN FRH GLT – Grupo de Lanzadores Tecnológicos EEST N°4 I Brigada Aérea El Palomar
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R15 |
| 10 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D11 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C4, C5, C6 |
| 3 | SW_Push_Dual | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW2, SW3, SW4 |
| 2 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3, J5 |
| 2 | Conn_01x19_Pin | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | esp1, esp32_1 |
| 2 | LM324A | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2 |
| 2 | PLACA | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J4, J8 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_5x3 | C2 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_5x3.9 | C3 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D10 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J16 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | HEADER_DOWN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-263-2 | U3 |
| 1 | LOGO | Imagenes:CDRSysLogo6mm | G*** |
| 1 | LOGO | Imagenes:Cohete2 | G*** |
| 1 | LOGO | Imagenes:LoRa | G*** |
| 1 | LOGO | Imagenes:CDRSys2 | G*** |
| 1 | LOGO | Imagenes:GNUchico | G*** |
| 1 | LOGO | Imagenes:LoRaChico | G*** |
| 1 | NPN | Package_TO_SOT_THT:TO-92L_Inline | Q1 |
| 1 | PLACA | Connector_PinHeader_1.27mm:PinHeader_1x12_P1.27mm_Vertical | J12 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | Relay_SPDT | Relay_THT:Relay_SPDT_Finder_36.11 | K1 |
| 1 | SOCKET_UP | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | SOCKET_UP | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J9 |
| 1 | SS34 | Diode_SMD:D_3220_8050Metric_Pad2.65x5.15mm_HandSolder | D12 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J15 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
The 63 most common of 70 parts.
ProfeRimoldi/Proyecto_CanSAT
Sistema electrónico para misión tipo CanSat desarrollado en la EEST N°4 I Brigada Aérea El Palomar, orientado al diseño, validación y documentación de hardware y firmware para sistemas embarcados aeroespaciales.
solarcaratuva/EmbeddedSystem
UVA Solar Car Embedded Systems PCB design and ECU code
ForNextSoftwareDevelopment/8085
Intel 8085 Assembler / Disassembler / SDK-85 Simulator
fer-clerkx/speeduino-expo
Speeduino board using Teensy 4.1 adapted from V0.4.4c design
FontysMinorAR/LevelShifter
This is an application for the Arduino Nano to test the Level shifter Board
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
70 parts, built around the LM324AD, L7805 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ProfeRimoldi/Proyecto_CanSAT repository on GitHub, at the commit this page was made from: the board is hardware/Earth_Station/kicad/Earth_Station.kicad_pcb and its schematic hardware/Earth_Station/kicad/Control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ProfeRimoldi before reusing the design.