I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well. You are free to make any further modifications in all these projects either by downloading simply or making them as git repositories on your local machines.
H Bridge is an open-source printed circuit board by Princediscjalpha, from the Princediscjalpha/DIY-PCB-Projects repository on GitHub. It is a 2-layer board of 121.2 × 104.2 mm with 42 parts on 19 nets, routed with 273 tracks and 24 vias.
It is built around the IRF3205. Its parts include 16 resistors, 8 diodes, 8 transistors, 6 connectors and 2 capacitors. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R7, R8, R11, R12, R15, R16 |
| 8 | 1N4148 | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | 5R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R5, R6, R9, R10, R13, R14 |
| 8 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 3 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J2, J3, J4 |
| 1 | 103 | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C5 |
| 1 | 335 | Capacitor_THT:C_Rect_L13.0mm_W3.0mm_P10.00mm_FKS3_FKP3_MKS4 | C6 |
| 1 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J6 |
| 1 | Conn_01x05_Female | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | NTC_1 | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | TH1 |
| 1 | NTC_2 | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | TH2 |
/Arduino%20Nano%20(Clone).kicad_pcb.jpg?size=s&soon)
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.
/Con%2Bfb(v%2Bi).kicad_pcb.jpg?size=s&soon)
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
ampnics/Project-10
Mater KiCad with Projects is a series of lectures in which we are learning PCB designing
It measures 121.2 × 104.2 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the IRF3205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Princediscjalpha/DIY-PCB-Projects repository on GitHub, at the commit this page was made from: the board is EGS002 module_pure sine wave inverter/H-Bridge/H-Bridge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Princediscjalpha before reusing the design.
