Skip to the content
2 layers53 × 30 mmBuck Convertor, the printed circuit board in 3D

EE4102 Electronic Product Design Project

Size
53 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
8
Pads
30
Tracks, vias
37, 1
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Dec 2025
Updated
24 Dec 2025

Overview

Buck Convertor is an open-source printed circuit board by PrathamKalgutkar, from the PrathamKalgutkar/Buck-Convertor repository on GitHub. It is a 2-layer board of 53 × 30 mm with 12 parts on 8 nets, routed with 37 tracks and 1 via.

It is built around the MC34063AD. Its parts include 3 capacitors, 3 resistors, 2 connectors, 1 IC and 1 diode. It belongs with the power boards of this library.

Main components

1

README

README.md

Buck Convertor designed for IIT Madras's EE4102 - "Electronic Product Design" Course Project Contained in the Repository are the KiCAD project Files, CSV file for Bill of Materials and PDF File of Final Report submitted to Course Instructor

The Project consisted of :

  • Design of Buck Convertor
  • Derivation of Component Values
  • Design of Circuit Schematic
  • Design of DRC checked PCB Board
  • 3D View of the Designed PCB
  • Estimation of Convertor Efficiency
  • Bill of Materials

Parts

12
QtyValueFootprintReferences
21KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R3
2Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ1, J2
10.3Resistor_SMD:R_1210_3225MetricRsc1
1100uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC2
110KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
11N5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
1270pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
16.8uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC3
168uHInductor_SMD:L_Sunlord_MWSA0624SL1
1MC34063ADPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1

Similar boards

  • 2 layers51.5 × 89 mmMobo, the printed circuit board in 3D

    Mobo

    opulo-inc/feeder

    Source for LumenPnP Feeders

    74 parts202
  • 2 layers70 × 36 mmAir Purifier Uppatvind, the printed circuit board in 3D

    Air Purifier Uppatvind

    horvathgergo/esp8266-for-uppatvind

    Smart controller for IKEA Uppåtvind Air Purifiers

    27 parts60GPL-3.0
  • 2 layers98 × 40 mmAir Purifier Fornuftig Switch, the printed circuit board in 3D

    Air Purifier Fornuftig Switch

    horvathgergo/esp8266-for-fornuftig

    Smart controller for IKEA Förnuftig Air Purifiers

    23 parts31GPL-3.0
  • 2 layers116.6 × 93.3 mmUsbdac, the printed circuit board in 3D

    Usbdac

    rspg/usb_sound_card_with_pico

    USB Sound Card with Raspberry Pi Pico Hard&Firm

    125 parts14
  • 2 layers73.9 × 46 mmTDR avalanche, the printed circuit board in 3D

    TDR avalanche

    MR-DOS/TDR-avalanche

    Avalanche pulser for use as TDR core

    80 parts11GPL-3.0
  • 4 layers282.8 × 122.9 mmSTM32AudioEffects, the printed circuit board in 3D

    STM32AudioEffects

    aidan-bin/ou-audio-effects-unit

    Audio effects unit designed for STM32

    97 parts8
  • 2 layers50.8 × 68.6 mmMCU Board, the printed circuit board in 3D

    MCU Board

    caipiblack/STM32-CAN-Bus-board

    This is an STM32F042K6T6 based board that can be used to build sensors that communicate over a CAN bus

    26 parts5GPL-3.0
  • 2 layers52.2 × 79 mmProgrammable light, the printed circuit board in 3D

    Programmable light

    dilshan/programmable-light

    Simple time based programmable light controller

    55 parts5MIT

Questions

How big is the Buck Convertor PCB?

It measures 53 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Buck Convertor use?

12 parts, built around the MC34063AD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Buck Convertor KiCad files?

From the PrathamKalgutkar/Buck-Convertor repository on GitHub, at the commit this page was made from: the board is Buck_Convertor/Buck_Convertor.kicad_pcb and its schematic Buck_Convertor/Buck_Convertor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Buck Convertor design in my own project?

Its repository states no licence, so its author keeps all rights: ask PrathamKalgutkar before reusing the design.