

Comet Gamepad V1-1759924099893 (2)
Extension for the Mecha Comet based on the nRF54H20 with GPS, IMU and CAN
- Size
- 58.8 × 54.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 55
- Pads
- 340
- Tracks, vias
- 802, 141
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Oct 2025
- Updated
- 28 Oct 2025
Overview
Comet Gamepad V1-1759924099893 (2) is an open-source printed circuit board by PedalPirat, from the PedalPirat/comet-Navigator repository on GitHub. It is a 4-layer board of 58.8 × 54.9 mm with 102 parts on 55 nets, routed with 802 tracks and 141 vias.
It is built around the STM32F042K6U6TR, 1N4007W and IN-S42ATUW, with the XC6220B331MR-G among its other parts. Its parts include 26 resistors, 21 connectors, 18 capacitors, 15 switches and 5 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
4STM32F042K6U6TR
UFQFPN-32(5x5)-40℃~+85℃ 1.65V~3.6V 12bit 26 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)1N4007W
SOD-123FLDiodes - General PurposehongjiachengIN-S42ATUW
0402LED Indication - DiscreteInoluxXC6220B331MR-G
SOT-25-40℃~+85℃ 1 1A 3.3V 50dB@(1kHz) 655mV@(1A) 6V 8uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Output discharge Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdcomet-Navigator
Extension for the Mecha Comet based on the nRF54H20 with GPS, IMU and CAN
Part of the PedalPirat ecosystem, intended to be used with the pizero_bikecomputer
Motivation
I want to use the pizero_bikecomputer on a Mecha Comet. For it to work it needs some sensors as described here, so the goal is to create a PCB with
- Nordic nRF54H20
- Supports ANT+ (soon)
- CAN
- USB Host to connect to the Comet
- u-blox MAX-M10S (GPS)
- Bosch BHI385 (IMU/Environmental)
- CAN-Transceiver (to connect to the PedalPirat or E-Bikes)
- 5 Buttons (to control the Software)
- USB Hub (?) to connect AI-Cameras
- Power Delivery to charge the Comet
- GPIO/I2C/SPI Breakout
Design Idea
PCB
The core will be a nRF54H20 MCU by Nordic to which the other Components get connected to.
There also needs to be a connector for the GPS antenna or an onboard antenna.

- Green1 = BHI385
- Blue = GPS Antenna
- Red = uBlox MAX-10S
- Green2 = Ezurio BL54H20 (nRF54H20)
- Yellow = CAN Transceiver
- White = BT/ANT+ Antenna
Firmware
The firmware will be written for the Nordic nRF Connect SDK which is based on the Zephyr RTOS.
The data of the sensors is accessed by the Comet via USB.
Mounting
Comet Extension
Extension that mounts on the Extension Interface of the Comet and screws to it's side to ensure it doesn't move.
Mount/Dock
Dock for the Comet that includes an USB-Hub to connect Cameras etc, connects CAN and Power.
Maybe something like the Bosch Intuvia Dock

Intuvia-Teardown More Teardown
Forum Discussion
Existing Products / Designs
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | HDR-M-1.27_1x1 | Comet_Gamepad_V1-1759924099893 (2):HDR-M-1.27_1X1 | J1, J2, J3, J4, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21 +5 |
| 17 | 10kΩ | Comet_Gamepad_V1-1759924099893 (2):R0402 | R6, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R24, R25, R26 +1 |
| 15 | Silicon_Pad_Circle | Comet_Gamepad_V1-1759924099893 (2):SILICON_PAD_CIRCLE | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15 |
| 7 | 1uF | Comet_Gamepad_V1-1759924099893 (2):C0402 | C2, C5, C7, C11, C12, C13, C14 |
| 5 | 4.7kΩ | Comet_Gamepad_V1-1759924099893 (2):R0402 | R1, R2, R3, R4, R10 |
| 4 | 47uF | Comet_Gamepad_V1-1759924099893 (2):C0603 | C3, C6, C15, C16 |
| 3 | 4.7uF | Comet_Gamepad_V1-1759924099893 (2):C0402 | C8, C9, C10 |
| 2 | 0Ω | Comet_Gamepad_V1-1759924099893 (2):R0603 | R8, R9 |
| 2 | 100pF | Comet_Gamepad_V1-1759924099893 (2):C0402 | C1, C4 |
| 2 | 4.3pF | Comet_Gamepad_V1-1759924099893 (2):C0402 | C22, C23 |
| 1 | 0Ω | Comet_Gamepad_V1-1759924099893 (2):R0402 | R5 |
| 1 | 1MΩ | Comet_Gamepad_V1-1759924099893 (2):R0402 | R23 |
| 1 | 1N4007W | Comet_Gamepad_V1-1759924099893 (2):SOD-123FL_L2.7-W1.8-LS3.8-RD | D45 |
| 1 | 20X2-POGO-PINS-PADS-2MM-PITCH | Comet_Gamepad_V1-1759924099893 (2):20X2-POGO-PINS-PADS-2MM-PITCH | U1 |
| 1 | 32.768kHz | Comet_Gamepad_V1-1759924099893 (2):CRYSTAL-SMD_L3.2-W1.5 | U39 |
| 1 | Hole_gge45780 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge45780 | Hole_gge45780 |
| 1 | Hole_gge45822 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge45822 | Hole_gge45822 |
| 1 | Hole_gge45837 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge45837 | Hole_gge45837 |
| 1 | Hole_gge45852 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge45852 | Hole_gge45852 |
| 1 | Hole_gge45867 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge45867 | Hole_gge45867 |
| 1 | Hole_gge45882 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge45882 | Hole_gge45882 |
| 1 | Hole_gge45897 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge45897 | Hole_gge45897 |
| 1 | Hole_gge45912 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge45912 | Hole_gge45912 |
| 1 | Hole_gge46029 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge46029 | Hole_gge46029 |
| 1 | Hole_gge46044 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge46044 | Hole_gge46044 |
| 1 | Hole_gge8298 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge8298 | Hole_gge8298 |
| 1 | Hole_gge8301 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge8301 | Hole_gge8301 |
| 1 | Hole_gge8304 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge8304 | Hole_gge8304 |
| 1 | Hole_gge8307 | Comet_Gamepad_V1-1759924099893 (2):Hole_gge8307 | Hole_gge8307 |
| 1 | IN-S42ATUW | Comet_Gamepad_V1-1759924099893 (2):LED0402-RD_WHITE | LED1 |
| 1 | IQS9150-001QFR-QFN52-6x6 | Comet_Gamepad_V1-1759924099893 (2):IQS9150-001QFR-QFN52-6X6 | U2 |
| 1 | STM32F042K6U6TR | Comet_Gamepad_V1-1759924099893 (2):UFQFPN-32_L5.0-W5.0-P0.50-TL-EP3.5 | U4 |
| 1 | Würth_Elektronik_FPC_CONN_687116182122 | Comet_Gamepad_V1-1759924099893 (2):WÜRTH_ELEKTRONIK_FPC_CONN_687116182122_CONN-SMD_16P-P0.50 | U3 |
| 1 | XC6220B331MR-G | Comet_Gamepad_V1-1759924099893 (2):SOT-25_L3.0-W1.6-P0.95-LS2.8-TL | Q1 |
Similar boards
- 2 layers99.5 × 90.5 mm

- 2 layers102 × 102 mm

- 2 layers79.1 × 56.3 mm

- 2 layers125.5 × 79 mm

PeterThePowerMeter
CtrlAltJon/PeterThePowerMeter
IoT Power Meter for real-time energy monitoring. Includes a local color display, acoustic alarms, and a web interface for smart home integration (Home Assistant/MQTT).
79 parts1MIT - 4 layers195 × 159 mm

- 2 layers94 × 48.1 mm

Daanmem esp32 board FO2DABBFD842
manhoosbilli1/smart-peltier-driver-esp32-v1
Smart Peltier driver, ESP32 (v1 - v2 in active development)
89 parts - 2 layers114.2 × 97.5 mm

- 2 layers77 × 94.9 mm

Pcb design
skakwy/just-another-macropad
KEEB Macropad is a compact mechanical macropad designed to enhance your productivity and workflow. With its sleek design and customizable features, this macropad is perfect for gamers, programmers, and anyone who wants…
34 partsMIT
Questions
How big is the Comet Gamepad V1-1759924099893 (2) PCB?
It measures 58.8 × 54.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Comet Gamepad V1-1759924099893 (2) use?
102 parts, built around the STM32F042K6U6TR, 1N4007W, IN-S42ATUW and XC6220B331MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Comet Gamepad V1-1759924099893 (2) KiCad files?
From the PedalPirat/comet-Navigator repository on GitHub, at the commit this page was made from: the board is resources/mecha/Comet-Gamepad-V1/KiCAD/Comet_Gamepad_V1/Comet_Gamepad_V1-1759924099893 (2).kicad_pcb and its schematic resources/mecha/Comet-Gamepad-V1/KiCAD/Comet_Gamepad_V1/Comet_Gamepad_V1-1759924099893 (2).kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Comet Gamepad V1-1759924099893 (2) design in my own project?
Its repository states no licence, so its author keeps all rights: ask PedalPirat before reusing the design.