
ESP32
KirtiChickamath/ESP32-IoT-sensor-board
ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.

Board ESP32 IoT board for learning Kicad
ESP32 Board Design is an open-source printed circuit board by PascalMALLE, from the PascalMALLE/ESP32-C3-IoT-Board repository on GitHub. It is a 4-layer board of 81.3 × 52.9 mm with 88 parts on 76 nets, routed with 954 tracks and 150 vias.
It is built around the ESP32-C3-WROOM-02-H4, BME280 and MAX4466EXK+T, with the W25Q32JVSSIQ, GSD090012SEU and TEMT6000X01 among its other parts. Its parts include 32 resistors, 22 capacitors, 7 ICs, 6 diodes and 5 connectors. It belongs with the home automation and IoT boards and the ESP32 and RISC-V boards of this library.
<<<<<<< HEAD
A custom-designed IoT development board built around the ESP32-C3-02, featuring USB-C connectivity, Li-ion battery charging, environmental sensing, audio input, and removable storage.
This project focuses on the design of a compact, custom PCB for IoT applications using KiCad. The board integrates wireless connectivity, power management, sensors, and data storage into a single hardware platform.
The schematic defines the electrical connections between the ESP32-C3-02, charging circuit, sensors, storage interfaces, and peripheral connectors.

The PCB layout implements the circuit connections, component placement, routing, and board geometry.
| Front Side | Bottom Side |
|---|---|
![]() | ![]() |
The 3D model provides a visual representation of the assembled PCB and component placement.

.kicad_sch.kicad_pcbPCB design and visualization completed. Hardware manufacturing, assembly, and functional validation should be documented as those stages are completed.
Pascal Malle
Electrical, Electronic and Telecommunications Engineering
This project is intended for learning, prototyping, and further development. Verify the charging and battery-protection circuitry against the selected components' datasheets before manufacturing or powering the board.
4541118 (Add ESP32-C3 IoT PCB design)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C8, C10, C13, C14, C15, C16, C18, C20, C21 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R17, R19, R30, R32, R33, R34 |
| 6 | 470R | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R14, R18 |
| 4 | 10u | ESP32 Project Footprints:T491A | C2, C4, C7, C12 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C6, C11, C19, C22 |
| 4 | 50R | Resistor_SMD:R_0805_2012Metric | R15, R16, R20, R22 |
| 3 | 2k | Resistor_SMD:R_0805_2012Metric | R5, R26, R28 |
| 3 | LTST-C170KRKT | ESP32 Project Footprints:LEDC2012X120N | LED1, LED6, PWR_LED |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R27, R29 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R24, R25 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LTST-C170GKT | ESP32 Project Footprints:LEDC2012X120N | LED2, LED5 |
| 1 | 0ZCH0110AF2E | ESP32 Project Footprints:FUSC3226X100N | F1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 22k1 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 4.7u | ESP32 Project Footprints:T491A | C9 |
| 1 | 47k5 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | B2B-PH-SM4-TB | ESP32 Project Footprints:JST_B2B-PH-SM4-TB | J2 |
| 1 | BME280 | ESP32 Project Footprints:PSON65P250X250X100-8N | U2 |
| 1 | BOOT | ESP32 Project Footprints:SW_USLPT2819DT2TR | S1 |
| 1 | CMC-5042PF-AC | ESP32 Project Footprints:CUI_CMC-5042PF-AC | MK1 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | ESP32-C3-WROOM-02-H4 | ESP32 Project Footprints:MODULE_ESP32-C3-WROOM-02-H4 | U3 |
| 1 | GSD090012SEU | ESP32 Project Footprints:AMPHENOL_GSD090012SEU | J3 |
| 1 | LM1117MPX-3.3 | ESP32 Project Footprints:VREG_LM1117MPX-3.3 | VR1 |
| 1 | LTST-C170TBKT | ESP32 Project Footprints:LEDC2012X120N | LED3 |
| 1 | MAX4466EXK | ESP32 Project Footprints:SOT65P210X110-5N | U7 |
| 1 | MCP73871-2CAI_ML | ESP32 Project Footprints:QFN50P400X400X100-21N | U1 |
| 1 | RESET | ESP32 Project Footprints:SW_USLPT2819DT2TR | S2 |
| 1 | SS-52400-002 | ESP32 Project Footprints:BELFUSE_SS-52400-002 | J1 |
| 1 | TEMT6000X01 | ESP32 Project Footprints:TRANS_TEMT6000X01 | Q1 |
| 1 | TEST CLOCK | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | TEST CS | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | TEST CS SD | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | TEST MISO | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | TEST MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | W25Q32JVSSIQ | ESP32 Project Footprints:SOIC127P790X216-8N | U6 |
The 85 most common of 88 parts.

KirtiChickamath/ESP32-IoT-sensor-board
ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.

ddennis18/ESP32-IoT-DevBoard
An ESP32-C3 based IoT controller board designed in KiCad. The board combines wireless control, sensor interfaces, local storage, audio/light sensing, USB connectivity, and single-cell Li-ion battery support on a compact…

kaushal1020/esp32-c3-02-KiCAD-Design
A custom ESP32-C3-02 Development Board designed from scratch using KiCad. This repository contains the complete hardware design, including schematic, PCB layout, and supporting files for manufacturing and development.

YUKESH0620/ESP32-C3-Sensor-PCB
This repository contains the complete hardware design of a custom ESP32-C3 based Smart Sensor Board, including schematics, PCB layout, and documentation.

Asaf66/ESP32-IoT-Sensor-Hub-Manufacturing-Ready-
hardware system based on ESP32-C3 (RISC-V architecture) on a 4-layer PCB for noise immunity. The project includes sensors (environment, light, and sound), smart power and charging management (MCP73871), and a user…

chopda15/ESP32-sensor-board
Custom-designed ESP32-C3 IoT PCB with integrated Li-ion charging, environmental sensing, data logging, USB-C connectivity, and power-efficient embedded system architecture.


It measures 81.3 × 52.9 mm and has 4 copper layers, 1.6 mm thick.
88 parts, built around the ESP32-C3-WROOM-02-H4, BME280, MAX4466EXK+T and W25Q32JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PascalMALLE/ESP32-C3-IoT-Board repository on GitHub, at the commit this page was made from: the board is ESP32 Board Design.kicad_pcb and its schematic ESP32 Board Design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PascalMALLE before reusing the design.