Skip to the content
2 layers208.5 × 125 mmKeychron hitbox, the printed circuit board in 3D

Keychron hitbox

Palochrono/IR_box1

Normally open (HIGH) keychron low profile optical hitbox

Size
208.5 × 125 mm
Copper layers
2
Thickness
1.69 mm
Parts
61
Nets
56
Pads
267
Tracks, vias
628, 68
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Nov 2024
Updated
5 Dec 2024

Overview

Keychron hitbox is an open-source printed circuit board by Palochrono, from the Palochrono/IR_box repository on GitHub, published under the MIT licence. It is a 2-layer board of 208.5 × 125 mm with 61 parts on 56 nets, routed with 628 tracks and 68 vias.

Its parts include 16 resistors, 16 switches and 6 ICs. It belongs with the RP2040 boards of this library.

README

README.md

IR_box

Normally open (HIGH) keychron low profile optical hitbox Keychron switches footprint from here

Part list

ComponentDescriptionNumber_used
R_IR180 $\Omega$ 080516
R_PT2k $\Omega$ 060316
Phototransistor080516
IR_led080516
Rp2040-zeroWaveshare1
Pushbutton6*6mm4
Key switchesKeychron optical low profile16
OLED display0.96 inch I2C SSD13061
Keycap setDOIO KCGM-02 KCGM-031

Schematics and Render

Half-vias used to use the extra pins in rp2040-zero 2024-11-27-11-07-15-524_015039

image

image

Parts

61
QtyValueFootprintReferences
16R_0805PCM_Resistor_SMD_AKL:R_0805_2012MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16
16R_PTPCM_4ms_Resistor:R_0603RP1, RP2, RP3, RP4, RP5, RP6, RP7, RP8, RP9, RP10, RP11, RP12, RP13, RP14, RP15, RP16
5MountingHoleSprtMyFootprints:MountingHole_2.2mm_M2_ISO7380_PadHS1, HS2, HS3, HS4, HS5
4~MyFootprints:6x6pushbuttonU1, U2, U3, U4
2S2MyFootprints:Keychron_Optical_Switch_23mmS1, S2
1B1MyFootprints:Keychron_Optical_Switch_23mmS9
1B2MyFootprints:Keychron_Optical_Switch_23mmS10
1B3MyFootprints:Keychron_Optical_Switch_23mmS13
1B4MyFootprints:Keychron_Optical_Switch_23mmS14
1DOWNMyFootprints:Keychron_Optical_Switch_23mmS6
1L1MyFootprints:Keychron_Optical_Switch_23mmS16
1L2MyFootprints:Keychron_Optical_Switch_23mmS12
1L3MyFootprints:Keychron_Optical_Switch_23mmS4
1LEFTMyFootprints:Keychron_Optical_Switch_23mmS8
1LOGOMyFootprints:transistor_maskG***
1R1MyFootprints:Keychron_Optical_Switch_23mmS15
1R2MyFootprints:Keychron_Optical_Switch_23mmS11
1R3MyFootprints:Keychron_Optical_Switch_23mmS3
1RIGHTMyFootprints:Keychron_Optical_Switch_23mmS7
1RP2040-Zero-extendedMyFootprints:RP2040 Zero zllpinU5
1SSD1306MyFootprints:128x64OLED_hollowedBrd1
1UPMyFootprints:Keychron_Optical_Switch_26mmS5
1~MyFootprints:usba_headerU6

Similar boards

  • 2 layers390 × 78.2 mmMBO, the printed circuit board in 3D

    MBO

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    61 parts960Apache-2.0
  • 2 layersTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    61 parts530
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0
  • 2 layers135.9 × 89.5 mmLeft, the printed circuit board in 3D

    Left

    TeXitoi/keyseebee

    KeySeeBee is a split ergo keyboard. It is only 2 PCB (so the name) with (almost) only SMD components on it. It's only a keyboard, no LED, no display, nothing more than keys and USB.

    61 parts348MIT
  • 2 layers59.7 × 57.5 mmFunBox, the printed circuit board in 3D

    FunBox

    GuitarML/FunBox

    Stereo guitar pedal platform using Daisy Seed.

    61 parts289MIT
  • 2 layers35 × 38.4 mmHandgelenk, the printed circuit board in 3D

    Handgelenk

    Jeija/esp8266-smartwatch

    ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...

    61 parts233
  • 2 layers99.9 × 99.9 mmEasy z80, the printed circuit board in 3D

    Easy z80

    skiselev/easy_z80

    An easy to build Zilog Z80 based single board computer

    61 parts180GPL-3.0
  • 2 layers135.3 × 106.7 mmAdlib, the printed circuit board in 3D

    Adlib

    schlae/adlib

    Reproduction AdLib Sound Card, OPL2, Circa 1990

    61 parts168

Questions

How big is the Keychron hitbox PCB?

It measures 208.5 × 125 mm and has 2 copper layers, 1.69 mm thick.

What parts does the Keychron hitbox use?

61 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keychron hitbox KiCad files?

From the Palochrono/IR_box repository on GitHub, at the commit this page was made from: the board is kicad/keychron_hitbox.kicad_pcb and its schematic kicad/keychron_hitbox.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keychron hitbox design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).