
Adafruit MAX31865
PPKoller/MAX31865x10
PCB for serial 4-point measurement of ten PT-100 temperature sensors using Raspberry Pi.

PCB for serial 4-point measurement of ten PT-100 temperature sensors using Raspberry Pi.
MAX31865 x10 PCB measures is an open-source printed circuit board by PPKoller, from the PPKoller/MAX31865x10 repository on GitHub. It is a 2-layer board of 215.9 × 59.7 mm with 171 parts on 162 nets, routed with 1,264 tracks and 189 vias.
It is built around the MAX31865AAP+ and MIC5225-3.3YM5. Its parts include 40 resistors, 32 capacitors, 30 diodes, 15 ICs and 11 connectors. It belongs with the sensors and measurement boards of this library.
PCB for serial 4-point measurement of ten PT-100 temperature sensors using Raspberry Pi.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 10K | Adafruit MAX31865:0805-NO | R1, R2, R10, R11, R13, R14, R15, R17, R18, R19, R21, R22, R23, R25, R26, R27 +14 |
| 30 | 1N4148 | Adafruit MAX31865:SOD-323 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 20 | 0.1uF | Adafruit MAX31865:0805-NO | C3, C10, C12, C13, C15, C16, C18, C19, C21, C22, C24, C25, C27, C28, C30, C31 +4 |
| 20 | SOLDERJUMPER | Adafruit MAX31865:SOLDERJUMPER_ARROW_NOPASTE | SJ2, SJ3, SJ11, SJ12, SJ14, SJ15, SJ17, SJ18, SJ20, SJ21, SJ23, SJ24, SJ26, SJ27, SJ29, SJ30 +4 |
| 10 | 100nF | Adafruit MAX31865:0805-NO | C5, C8, C11, C14, C17, C20, C23, C26, C29, C32 |
| 10 | 430Ω / 4300Ω 0.1% | Adafruit MAX31865:0805-NO | R4, R8, R12, R16, R20, R24, R28, R32, R36, R40 |
| 10 | Conn_01x04 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11 |
| 10 | FERRITE-0805NO | Adafruit MAX31865:0805-NO | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8, FB9, FB10 |
| 10 | MAX31865 | Adafruit MAX31865:QFN20_4MM_0.65MM | U6, U7, U8, U9, U10, U11, U12, U13, U14, U15 |
| 10 | SOLDERJUMPER_2WAY | Adafruit MAX31865:SOLDERJUMPER_2WAY_OPEN_NOPASTE | SJ1, SJ4, SJ7, SJ10, SJ13, SJ16, SJ19, SJ22, SJ25, SJ28 |
| 4 | MOUNTINGHOLE3.0 | MountingHole:MountingHole_3.2mm_M3 | U1, U2, U3, U4 |
| 2 | , | ||
| 2 | 10uF | Adafruit MAX31865:0805-NO | C1, C2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | MIC5225-3.3 | Adafruit MAX31865:SOT23-5 | U5 |

PPKoller/MAX31865x10
PCB for serial 4-point measurement of ten PT-100 temperature sensors using Raspberry Pi.



Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba


generationmake/TMF882xBreakout
Breakout board for the ams TMF8820, TMF8821 and TMF8828 multi-zone time-of-flight sensors

generationmake/TMF8801Breakout
Breakout board for the ams TMF8801 1D time-of-flight sensor


FirstLinkConsutlingService/UniversalKilnController
A Hardware/Software project to control devices of the KILN persuasion ( temperature and cooking time manager)
It measures 215.9 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
171 parts, built around the MAX31865AAP+ and MIC5225-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PPKoller/MAX31865x10 repository on GitHub, at the commit this page was made from: the board is MAX31865_x10_PCB/MAX31865_x10_PCB_measures.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PPKoller before reusing the design.