4 layers98.3 × 111.5 mm
Carte Alim V6 2022
PCBrs/CDR-Electronique
Carte électronique pour la Coupe de France de robotique
122 parts
2 layers87.5 × 52.5 mm
PCB Pompe V2
PCBrs/CDR-ElectroniqueCarte électronique pour la Coupe de France de robotique
- Size
- 87.5 × 52.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 142
- Nets
- 78
- Pads
- 406
- Tracks, vias
- 518, 80
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Nov 2021
- Updated
- 9 Nov 2022
Overview
PCB Pompe V2 is an open-source printed circuit board by PCBrs, from the PCBrs/CDR-Electronique repository on GitHub. It is a 2-layer board of 87.5 × 52.5 mm with 142 parts on 78 nets, routed with 518 tracks and 80 vias.
It is built around the SN65HVD232D and DMN10H700S-7. Its parts include 44 resistors, 44 diodes, 20 transistors, 14 connectors and 11 capacitors. It belongs with the STM32 boards of this library.
Main components
2README
README.mdCDR-Electronique
Carte électronique pour la Coupe de France de robotique de l'équipe PCBrs.
La carte principale est basée sur une Teensy 4.1, la communication est faite par Wi-Fi via un ESP32 et la communication interne du robot via un bus CAN. Les cartes sont modulaires et spécifiques, on peut ajouter plusieurs fois le meme types de cartes il faut juste changer l'ID CAN de la carte en soft. Le microcontroleur des cartes périphériques est un STM32F302C8T6.
Les cartes ont été conçus sur Kicad.
Parts
142| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | LED_DEBUG | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D12, D13, D16, D17, D20, D21, D22, D23, D26, D27, D31, D32, D34, D35, D38 +7 |
| 21 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R11, R12, R15, R16, R19, R20, R23, R26, R27, R31, R32, R34, R35, R38, R39 +5 |
| 20 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R10, R13, R14, R17, R18, R24, R25, R28, R29, R30, R33, R36, R37, R40, R41 +4 |
| 20 | D | Diode_SMD:D_SOD-123 | D3, D10, D11, D14, D15, D18, D19, D24, D25, D28, D29, D30, D33, D36, D37, D40 +4 |
| 20 | DMN10H700S | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20 +4 |
| 10 | Conn_01x03_Female | AREA_lib_Connector:Wuerth_2.54mm_3pins_61900311121 | J3, J4, J5, J6, J7, J9, J10, J11, J12, J14 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C7, C13, C14 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9 |
| 2 | 18pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R22 |
| 2 | Conn_01x04_Female | AREA_lib_Connector:690367290476 | J1, J2 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 470µF/50V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C10 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | Conn_01x02_Male | AREA_lib_Connector:Wuerth_3.96mm_2pin_645002114822 | J8 |
| 1 | Conn_01x05_Female | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J13 |
| 1 | D_TVS_x2_AAC | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | SN65HVD232 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | STM32F302C6Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
More from PCBrs/CDR-Electronique
12- 4 layers88.9 × 100.3 mm
Carte Alim V6 2022
PCBrs/CDR-Electronique
Carte électronique pour la Coupe de France de robotique
102 parts - 2 layers78 × 48 mm
- 2 layers70.8 × 87.9 mm
- 2 layers
- 2 layers82.8 × 56 mm
PCB Principal V4
PCBrs/CDR-Electronique
Carte électronique pour la Coupe de France de robotique
62 parts - 4 layers48.9 × 57.2 mm
- 2 layers64.4 × 43.7 mm
- 2 layers62 × 45.3 mm
- 2 layers58 × 28.5 mm
Rmeasure V1 Board
PCBrs/CDR-Electronique
Carte électronique pour la Coupe de France de robotique
48 parts - 2 layers68 × 40.5 mm
- 4 layers51 × 19.7 mm
PCB dev stm32f302
PCBrs/CDR-Electronique
Carte électronique pour la Coupe de France de robotique
31 parts
Similar boards
- 4 layers89.8 × 59.3 mm
- 2 layers55.6 × 54.8 mm
Signal Generator
Jmanicom/ELAB-Signal-Generator
A square wave generator with adjustable frequency, gain, and offset control. Designed as a part of UBC's ELAB PCB design course.
72 partsCERN-OHL-S-2.0 - 2 layers80.5 × 62 mm
PCB course
seankyer/QuickSig
A signal generator circuit completed as part of a PCB course at UBC
73 parts - 4 layers49.5 × 29 mm
XESC2
ClemensElflein/xESC
The xESC is an easy to use, low cost electronic speed controller (ESC) design for sensored brushless DC (BLDC) motors.
114 parts378 - 2 layers67 × 50 mm
QuadcopterMain
vedderb/QuadcopterSystem
The hardware and software for our quadcopter system
95 parts30GPL-3.0 - 4 layers96 × 172 mm
- 4 layers52.1 × 55.6 mm
- 2 layers66.8 × 42.4 mm
KiCad CAN motor driver
wjklimek1/CAN_motor_controller
H-bridge for DC motor controlled by CAN or PWM
78 parts7MIT
Questions
How big is the PCB Pompe V2 PCB?
It measures 87.5 × 52.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Pompe V2 use?
142 parts, built around the SN65HVD232D and DMN10H700S-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Pompe V2 KiCad files?
From the PCBrs/CDR-Electronique repository on GitHub, at the commit this page was made from: the board is PCB_Pompe_V2/PCB_Pompe_V2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Pompe V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask PCBrs before reusing the design.