
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

keyboard firmware written in Rust and circuit
Wavier keys is an open-source printed circuit board by Oya-Tomo, from the Oya-Tomo/wavier-keys repository on GitHub. It is a 2-layer board of 349.3 × 108 mm with 147 parts on 104 nets, routed with 1,018 tracks and 7 vias.
Its parts include 68 diodes, 1 IC and 1 connector. It belongs with the RP2040 boards of this library.
this repo contains the firmware program written in Rust with rp-2040 bsp and circuit file made with kicad.
test, test, ah... ah... This message was written with Wavier Keys keyboard.
Oya-Tomo
| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52 |
| 56 | KeySocket | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.00u | KS1, KS11, KS12, KS13, KS14, KS16, KS17, KS18, KS19, KS20, KS21, KS22, KS23, KS24, KS25, KS26 +40 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | KeySocket | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.25u | KS5, KS10, KS15 |
| 2 | KeySocket | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.50u | KS2, KS60 |
| 2 | KeySocket | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.75u | KS3, KS55 |
| 2 | KeySocket | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_2.25u | KS4, KS61 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | KeySocket | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_2.00u | KS64 |
| 1 | KeySocket | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_6.25u | KS28 |
| 1 | LOGO | logo:logo | G*** |
| 1 | Pico | RPi_Pico:RPi_Pico_SMD_TH | U1 |
| 1 | locked | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.00u | locked |
The 143 most common of 147 parts.

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family



fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources

junglejim8/opensolar
Maximum Power Point Tracking Solar Charge Controller 100V input, 65amp

PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…

It measures 349.3 × 108 mm and has 2 copper layers, 1.6 mm thick.
147 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Oya-Tomo/wavier-keys repository on GitHub, at the commit this page was made from: the board is circuit/main/main.kicad_pcb and its schematic circuit/main/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Oya-Tomo before reusing the design.