

BB Dash Display
- Size
- 54.6 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 122
- Pads
- 254
- Tracks, vias
- 450, 54
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Mar 2020
- Updated
- 2 Jun 2021
Overview
BB Dash Display is an open-source printed circuit board by OxfordUniRacing, from the OxfordUniRacing/BB_Dash_Display repository on GitHub. It is a 2-layer board of 54.6 × 61 mm with 46 parts on 122 nets, routed with 450 tracks and 54 vias.
It is built around the TCAN1042VDQ1, TPS61165DBV and TPS562200DDC, with the FH12-40S-0.5SH(55), MBR0540 and SMF4L15A among its other parts. Its parts include 11 capacitors, 6 resistors, 5 connectors, 3 ICs and 2 diodes. It belongs with the lEDs and displays boards of this library.
Main components
6TCAN1042VDQ1
SOIC-8-55℃~+125℃ 4.5V~5.5V 5Mbps CAN Transceiver Low-power mode、Wake-up function、TXD dominant timeout、ESD Protection、Undervoltage Protection、Thermal shutdown protection、Bus Fault Protection、Integrated level shifting SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTPS61165DBV
SOT-23-6-40℃~+85℃ 1 1.2A 1.2MHz 2% 3V~18V 3V~38V Boost Built-in DC-DC Over Voltage Protection、Over-Temperature Protection (OTP) PWM SOT-23-6 LED Drivers ROHSTexas InstrumentsLED DriversTPS562200DDC
UncategorisedTexas InstrumentsFH12-40S-0.5SH(55)
SMD,P=0.5mm,卧贴-40℃~+85℃ 0.3mm 0.5mm 2mm 40P Bottom Contact Gold Hinged Lid Phosphor bronze Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSHirose ElectricFFC, FPC (Flat Flexible) Connector AssembliesMBR0540
SOD-123-55℃~+150℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHSonsemiSchottky DiodesSMF4L15A
SOD-123FL15V 16.4A 16.7V 1uA 24.4V 400W IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSLGEESD And Surge Protection (TVS/ESD)
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | TestPoint | archive:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 5 | 33 | archive:R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4, RN5 |
| 3 | 100nF | archive:C_0805_2012Metric | C1, C5, C6 |
| 3 | 10uF | archive:C_1206_3216Metric | C2, C8, C9 |
| 2 | 22uF | archive:C_0805_2012Metric | C10, C11 |
| 2 | 33 | archive:R_0805_2012Metric | R1, R3 |
| 2 | BeagleBone_Black_Header | archive:PinHeader_2x23_P2.54mm_Vertical_Flip | P8, P9 |
| 1 | 0.1uF | archive:C_0805_2012Metric | C7 |
| 1 | 10k | archive:R_0805_2012Metric | R6 |
| 1 | 10uF | archive:C_1210_3225Metric | C3 |
| 1 | 120 | archive:R_0805_2012Metric | R4 |
| 1 | 1A | archive:Fuseholder_Littelfuse_Nano2_154x | F1 |
| 1 | 220nF | archive:C_0805_2012Metric | C4 |
| 1 | 22uH | archive:L_Bourns-SRN4018 | L1 |
| 1 | 3.3 | archive:R_0805_2012Metric | R2 |
| 1 | 4.7uH | archive:L_Bourns-SRN4018 | L2 |
| 1 | 56k | archive:R_0805_2012Metric | R5 |
| 1 | FH12-40S-0.5SH | archive:Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J1 |
| 1 | MBR0540 | archive:D_SOD-123 | D1 |
| 1 | Mini_SPOX | archive:Molex_SPOX_5268-03A_1x03_P2.50mm_Horizontal | J2 |
| 1 | Mini_SPOX | archive:Molex_SPOX_5268-02A_1x02_P2.50mm_Horizontal | J3 |
| 1 | SMF4L15A | archive:D_SOD-123 | D2 |
| 1 | SolderJumper_2_Open | archive:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | TCAN1042V | archive:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TPS562200 | archive:SOT-23-6 | U3 |
| 1 | TPS61165 | archive:SOT-23-6 | U1 |
The 45 most common of 46 parts.
Similar boards
- 4 layers68.6 × 53.3 mm

- 2 layers140 × 70 mm

- 2 layers75 × 140 mm

- 4 layers30 × 40 mm

- 4 layers35.9 × 43.1 mm

- 2 layers65 × 75 mm

- 2 layers100 × 103.5 mm

- 6 layers107 × 68 mm

Cm4-baseboard
antmicro/cm4-baseboard
Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout
516 parts36Apache-2.0
Questions
How big is the BB Dash Display PCB?
It measures 54.6 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BB Dash Display use?
46 parts, built around the TCAN1042VDQ1, TPS61165DBV, TPS562200DDC and FH12-40S-0.5SH(55). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BB Dash Display KiCad files?
From the OxfordUniRacing/BB_Dash_Display repository on GitHub, at the commit this page was made from: the board is BB_Dash_Display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BB Dash Display design in my own project?
Its repository states no licence, so its author keeps all rights: ask OxfordUniRacing before reusing the design.