2 layers
2 layers188 × 66.7 mm
Driver
Outurnate/tesla-coilPCBs, code, and models for a tesla coil
- Size
- 188 × 66.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 30
- Pads
- 111
- Tracks, vias
- 215, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Jul 2023
- Updated
- 12 Jul 2023
Overview
Driver is an open-source printed circuit board by Outurnate, from the Outurnate/tesla-coil repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 188 × 66.7 mm with 42 parts on 30 nets, routed with 215 tracks and 0 vias.
It is built around the FGA60N65SMD, UCC27425D and 74HC14, with the NE555P among its other parts. Its parts include 10 capacitors, 6 resistors, 6 diodes, 5 ICs and 3 connectors.
Main components
4
FGA60N65SMD
TO-3PN1.54mJ 104ns 180A 189nC@15V 18ns 2.5V@60A,15V 2.915nF 270pF 450uJ 47ns 650V 6V@250uA 85pF FS (Field Stop) TO-3PN IGBT Transistors / Modules ROHSonsemiIGBT Transistors / Modules
UCC27425D
SOIC-8-40℃~+125℃ 15ns 2 20ns 25ns 35ns 4.28A 4.5A 4V~15V Low Side MOSFET SOIC-8 Gate Drivers ROHSTexas InstrumentsGate Drivers
74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInverters
NE555P
DIP-80℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4, D5, D6 |
| 2 | 0.1uF | Capacitor_THT:C_Rect_L11.0mm_W2.8mm_P10.00mm_MKT | C7, C10 |
| 2 | 0.82uF | Capacitor_THT:C_Rect_L16.5mm_W4.9mm_P15.00mm_MKT | C8, C9 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2, C3 |
| 2 | 6.8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
| 2 | FGA60N65SMD | local:TO-3P-3_Vertical_Heatsink | Q1, Q2 |
| 1 | 0-2M | local:282834-2 | RV1 |
| 1 | 0-50k | local:282834-2 | RV2 |
| 1 | 0.33uF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C1 |
| 1 | 10uF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C5 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 1uF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C6 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C4 |
| 1 | 50k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 74HC14 | Package_DIP:DIP-8_W7.62mm | U4 |
| 1 | Antenna | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | AE1 |
| 1 | External Interrupt | local:282834-3 | J2 |
| 1 | HV INPUT | local:TE_1546833-2 | J3 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LM7812_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LV INPUT | local:TE_1546833-2 | J1 |
| 1 | Mode | local:282834-3 | SW1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | PRIMARY | local:TE_1546833-2 | L1 |
| 1 | Transformer_1P_2S | local:GDT | T1 |
| 1 | UCC27425 | Package_DIP:DIP-8_W7.62mm | U5 |
The 38 most common of 42 parts.
More from Outurnate/tesla-coil
2- 2 layers99.1 × 99.1 mm
Similar boards
- 2 layers69.5 × 123.8 mm
- 2 layers100 × 93.7 mm
Self Tuning SSTC
Firestorm108/Self-Tuning-SSTC
Solid state tesla coil that switches automatically in resonance!
48 parts4 - 2 layers152.9 × 74.9 mm
- 2 layers105.5 × 91.5 mm
Signal enhancer
neuroMoth/3-Port-Bpod-Rig
All CAD files, code, circuity, and documentation for a new 3 port Samuelsen lab experimental rig.
25 parts1MIT - 4 layers92.7 × 63.1 mm
555 doom kicad
nickbild/555_doom_pcb
The circuit plays the opening riff from "At Doom's Gate" without a microcontroller, computer, or any software.
89 parts1MIT - 2 layers68.6 × 53.3 mm
- 2 layers99.1 × 99.1 mm
Retro stack power clock
gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.
59 partsApache-2.0 - 2 layers90.1 × 130.6 mm
Questions
How big is the Driver PCB?
It measures 188 × 66.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Driver use?
42 parts, built around the FGA60N65SMD, UCC27425D, 74HC14 and NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Driver KiCad files?
From the Outurnate/tesla-coil repository on GitHub, at the commit this page was made from: the board is pcb/driver.kicad_pcb and its schematic pcb/audio_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Driver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).