Skip to the content
2 layers158.8 × 53.3 mmGPS Clock Ver2, the printed circuit board in 3D

FPGA Based GPS Synchronized Clock

Size
158.8 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
94
Nets
177
Pads
373
Tracks, vias
828, 58
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
3 Apr 2021
Updated
7 May 2021

Overview

GPS Clock Ver2 is an open-source printed circuit board by Otter-IO, from the Otter-IO/GPS-Synchronized-Clock repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 158.8 × 53.3 mm with 94 parts on 177 nets, routed with 828 tracks and 58 vias.

Its parts include 72 resistors, 5 diodes, 5 connectors and 3 switches. It belongs with the lEDs and displays and radio and wireless boards of this library.

README

README.md

GPS-Synchronized-Clock

This is an FPGA based GPS Synchronized Clock. It utilizes an Intel 10M02SCE144 single supply FPGA with integrated configuration memory.

The clock is split into 2 pieces, the FPGA board and the clock display. This was done so that to FPGA board could be used for other projects easily without redesign. It also allowed me to use a 4-layer board for the FPGA and a 2-layer board for the clock display. This helped keep costs low while also getting the advantages of a 4-layer board for the FPGA. The boards were designed using KiCAD.

The code is written in Verilog and is split into multiple modules to allow for easy modification and reuse. The bitstream files for the FPGA were generated using the free version of Intel Quartus Prime. The entire project is included for your use.

The code is by no means perfect. I’m still learning Verilog and there are certainly optimizations that could be made, especially with the SDC timing file. If you have more experience with FPGAs feel free to improve the design.

See the final product on YouTube: https://www.youtube.com/watch?v=TpDHRGk3vro

Parts

94
QtyValueFootprintReferences
69220Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +53
97_SegmentCustom_Parts:0.56_CC_7_Segment_DisplayDS1, DS2, DS3, DS4, DS5, DS6, DS7, DS8, DS9
5LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5
310kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR69, R70, R71
3Tact_SwitchCustom_Parts:THT_Tact_SwitchS1, S2, S3
2Conn_02x20_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ2, J4
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5
1Conn_02x02_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ1
1Conn_02x14_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x14_P2.54mm_VerticalJ3

More from Otter-IO/GPS-Synchronized-Clock

1

Similar boards

  • 2 layers102 × 85 mmSuperflat, the printed circuit board in 3D

    Superflat

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    94 parts915
  • 2 layers58 × 71 mmMLX90640-allsky, the printed circuit board in 3D

    MLX90640-allsky

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    94 parts208
  • 2 layers45.2 × 146.8 mmVca, the printed circuit board in 3D

    Vca

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    94 parts208
  • 2 layers62.3 × 64.3 mmCapacitor alarm clock, the printed circuit board in 3D

    Capacitor alarm clock

    ArcaEge/capacitor-alarm-clock

    capacitor blow up human wake up

    94 parts156MIT
  • 2 layers180 × 160 mmIidx pico, the printed circuit board in 3D

    Iidx pico

    whowechina/iidx_pico

    Pico beatmania IIDX controller

    94 parts125
  • 2 layers145.7 × 107.8 mmTRS IO++, the printed circuit board in 3D

    TRS IO++

    apuder/TRS-IO

    TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:

    94 parts75GPL-3.0
  • 2 layers49.6 × 37.2 mmLocateMagnet, the printed circuit board in 3D

    LocateMagnet

    Aiano/LocateMagnet

    磁定位系统

    94 parts64
  • 2 layers65 × 40 mmNF6-MCP2210-v01, the printed circuit board in 3D

    NF6-MCP2210-v01

    nanofury/NanoFury

    NanoFury Project

    94 parts62GPL-3.0

Questions

How big is the GPS Clock Ver2 PCB?

It measures 158.8 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GPS Clock Ver2 use?

94 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GPS Clock Ver2 KiCad files?

From the Otter-IO/GPS-Synchronized-Clock repository on GitHub, at the commit this page was made from: the board is GPS_Clock_Ver2/GPS_Clock_Ver2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GPS Clock Ver2 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).