2 layers76 × 56 mm
Ai sdr mini
HaohanHe/MBDSDR
AI-driven SDR & VNA system: LLM-callable tools over MCP with human-approval gates (C++/Qt6 + Python + Flutter)
62 partsMIT
2 layers13.4 × 23.8 mm
OpenRemoteID
OpenDrone-hw/OpenRemoteID7Open hardware concept for a standalone Remote ID module: ESP32-C3 plus GNSS receiver. Incomplete, not a compliant product.
- Size
- 13.4 × 23.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 83
- Pads
- 91
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Mar 2026
- Updated
- 13 Oct 2026
Overview
OpenRemoteID is an open-source printed circuit board by OpenDrone-hw, from the OpenDrone-hw/OpenRemoteID repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 13.4 × 23.8 mm with 6 parts on 83 nets.
It is built around the ATGM336H-5NR32-G, ESP32-C3-MINI-1-N4 and 16-213/GHC-YR1S1/3T, with the B3U-1000P, CONUFL001-SMD-T and ME6211C33M5G-N among its other parts. Its parts include 2 ICs, 1 diode and 1 switch. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.
Main components
6
ATGM336H-5NR32-G
SMD,10x9.6mm-148dBm -40℃~+85℃ 1.8V~3.6V 2.5m 26mA@3.3V 32s GPS、BDS、QZSS、GLONASS UART SMD,10x9.6mm GNSS Modules ROHSZHONGKEWEIGNSS Modules
ESP32-C3-MINI-1-N4
SMD,16.6x13.2mm-40℃~+85℃ -98dBm 20.5dBm 350mA 3V~3.6V 84mA Integrated temperature sensor、Integrated antenna、Built-in watchdog On-board PCB Antenna SPI、UART、I2C、I2S、USB Transceiver SMD,16.6x13.2mm WiFi Modules ROHSEspressif SystemsRF Modules
16-213/GHC-YR1S1/3T
0402-40℃~+85℃ 110mW 120° 168.5mcd 20mA 3.3V 518nm 528nm Discrete Diode Green Water Clear 0402 LED Indication - Discrete ROHSEverlight ElectronicsLED Indication - Discrete
B3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile Switches
CONUFL001-SMD-T
SMD-40℃~+90℃ 1 50Ω 6GHz Board Side Male Pin SMD Coaxial Connectors (RF) ROHSTE ConnectivityCoaxial Connectors (RF)
ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdOpenRemoteID
Open hardware for a standalone broadcast Remote ID module built around an ESP32-C3-MINI-1 radio module and an ATGM336H GNSS receiver.
Status
This repository is an incomplete hardware concept, not a compliant or released product. The KiCad schematic contains six placed devices and does not pass ERC; run it for the current findings. The two-layer PCB contains the same six footprints and no routed tracks, vias or copper zones. No firmware is present.
The intended interfaces are 5 V power, ground, UART RX/TX, a GNSS antenna on U.FL, a status LED and a push button. See hardware/DESIGN.md for the boundary between checked-in design facts and design intent.
Repository
hardware/OpenRemoteID.kicad_sch: incomplete schematichardware/OpenRemoteID.kicad_pcb: incomplete two-layer placementhardware/lib.kicad_sym,hardware/lib.pretty/,hardware/lib.3dshapes/: project-local librarieshardware/DESIGN.md: design boundary, design intent and datasheet links- Remote ID module market research (reference material, not product evidence): Notion Research entry
Regulatory position
ASTM F3411 and EN 4709-002 are design targets only. This repository contains no completed firmware, conformity assessment, declaration, radio test report or authority acceptance for this product. Certification or modular approval of a component does not by itself certify the finished product.
License
Hardware is licensed under CERN-OHL-S-2.0.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 16-213/GHC-YR1S1/3T | lib:LED0402-R-RD | LED2 |
| 1 | ATGM336H-5NR-32 | lib:GPS-SMD_18P-L10.1-W9.7-P1.10-TL | U3 |
| 1 | B3U-1000P | lib:KEY-SMD_B3U-1000PM | SW2 |
| 1 | CONUFL001-SMD-T | lib:IPEX-SMD_3P-L2.6-W2.6-LS3.0 | RF2 |
| 1 | ESP32-C3-MINI-1-N4 | lib:WIFIM-SMD_ESP32-C3-MINI-1 | U2 |
| 1 | ME6211C33M5G-N | lib:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | LDO2 |
Similar boards
- 6 layers40.8 × 17.6 mm
- 4 layers65 × 30 mm
- 4 layers33.9 × 42.3 mm
PCBGolf
ulyssecrn/PCBGolf
comma.ai PCBGolf entry: 4-port CAN-FD dev board on a 35 × 43 mm, 4-layer PCBA. KiCad 10.
253 parts - 6 layers54 × 28 mm
- 2 layers40 × 30 mm
Placed
RileyMcCarthy/pcb-space
Zener-style compiler for PCB placement and routing: AI writes Place/NetReq, geometry is compiled, KiCad is the backend.
19 partsMIT - 4 layers55 × 30.3 mm
- 4 layers34.9 × 48.5 mm
Questions
How big is the OpenRemoteID PCB?
It measures 13.4 × 23.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OpenRemoteID use?
6 parts, built around the ATGM336H-5NR32-G, ESP32-C3-MINI-1-N4, 16-213/GHC-YR1S1/3T and B3U-1000P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpenRemoteID KiCad files?
From the OpenDrone-hw/OpenRemoteID repository on GitHub, at the commit this page was made from: the board is hardware/OpenRemoteID.kicad_pcb and its schematic hardware/OpenRemoteID.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpenRemoteID design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).