Skip to the content
2 layers47.8 × 36.4 mmClass Project, the printed circuit board in 3D

The circuit is an op-amp based waveform generator capable of producing square and triangle waveforms using oscillator and integrator stages. This project helped in understanding: 1. Analog circuit design 2.

Size
47.8 × 36.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
35
Pads
74
Tracks, vias
150, 18
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 May 2026
Updated
27 May 2026

Overview

Class Project is an open-source printed circuit board by Ontim-Nath02, from the Ontim-Nath02/Op-Amp-Function-Generator-using-LM741 repository on GitHub. It is a 2-layer board of 47.8 × 36.4 mm with 26 parts on 35 nets, routed with 150 tracks and 18 vias.

Its parts include 10 resistors, 6 connectors, 4 ICs and 2 capacitors.

README

README.md

A simple analog waveform generator designed using LM741 operational amplifiers.

This project was initially developed in Proteus Professional as part of an academic project. Later, the same project was completely recreated in KiCad-9 as a personal learning project to practice:

  1. schematic design,
  2. PCB layout,
  3. component placement,
  4. and manual routing. Both versions include the complete circuit design and PCB implementation.

Project Overview

The circuit is an op-amp based waveform generator capable of producing square and triangle waveforms using oscillator and integrator stages. This project helped in understanding:

  1. Analog circuit design
  2. Operational amplifier applications
  3. RC timing circuits
  4. PCB design workflow
  5. Schematic capture and routing

Development Workflow

Academic — Proteus

  1. Circuit design
  2. Simulation and testing
  3. Academic project implementation

Learning — KiCad

  1. Recreated the full schematic
  2. Designed PCB layout
  3. Manual routing and placement
  4. PCB visualization and export

Components Used

  1. Op-Amps ---> LM741
  2. Resistors ---> 1kΩ, 2.7kΩ, 10kΩ
  3. Potentiometers ---> 10kΩ, 100kΩ
  4. Capacitors ---> 22nF

Proteus Schematic View

Proteus_Sch

KiCAD Schematic View

KiCAD_Sch

KiCAD PCB Editor View

KiCAD_Editor_View

KiCAD 3D Front View

KiCAD_PCB_Front

KiCAD 3D Back View

KiCAD_PCB_Back

Applications

  1. Electronics laboratory projects
  2. Analog waveform generation
  3. PCB design practice
  4. Real and Educational op-amp experiments

Created by

Ontim Nath

Parts

26
QtyValueFootprintReferences
610kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2, R3, R5, R6, R8, R10
6Conn_01x01Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_VerticalJ1, J2, J3, J4, J5, J6
4LM741Package_DIP:DIP-8_W7.62mmU1, U2, U3, U5
32k7Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR4, R7, R9
2100kPotentiometer_THT:Potentiometer_ACP_CA6-H2,5_HorizontalRV2, RV4
222nCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C2
110kPotentiometer_THT:Potentiometer_ACP_CA6-H2,5_HorizontalRV1
11kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
1R_PotentiometerPotentiometer_THT:Potentiometer_ACP_CA6-H2,5_HorizontalRV3

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Class Project PCB?

It measures 47.8 × 36.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Class Project use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Class Project KiCad files?

From the Ontim-Nath02/Op-Amp-Function-Generator-using-LM741 repository on GitHub, at the commit this page was made from: the board is KiCAD_File/Class_Project.kicad_pcb and its schematic KiCAD_File/Class_Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Class Project design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ontim-Nath02 before reusing the design.