
Iso adc cvm
OisinS13/FC_IP_rig
Code to control a FC rig based around a Powercell S2 24 cell PEMFC stack

Code to control a FC rig based around a Powercell S2 24 cell PEMFC stack
ControlCircuit is an open-source printed circuit board by OisinS13, from the OisinS13/FC_IP_rig repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 191.9 × 88.8 mm with 124 parts on 149 nets, routed with 609 tracks and 36 vias.
It is built around the 1EDI60H12AHXUMA1, SI8384PM-IU and MAX22531AAP+, with the TPS7A2050PDBVR, BSS138 and PWR263S-35-10R0F among its other parts. Its parts include 60 resistors, 20 capacitors, 12 transistors, 9 ICs and 9 diodes. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R25, R40, R47, R52, R53, R54, R55, R56, R57, R58, R59, R60 |
| 12 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 11 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R13, R15, R17, R19, R21, R23, R26, R30, R41, R45 |
| 9 | 2.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R6, R9, R12, R34, R35, R36, R37 |
| 9 | 200 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R16, R18, R20, R22, R24, R28, R29, R31 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5, R7, R11, R39, R44, R46 |
| 7 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C14, C15, C16 |
| 4 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C12, C21, C22 |
| 4 | PWR263S-35-10R0F | SamacSys_Parts:PWR263S3510R0F | R48, R49, R50, R51 |
| 3 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8 |
| 3 | 1 uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C10 |
| 3 | SCL SDA 5V+ GND | SamacSys_Parts:1963557 | I2C_0, I2C_1, I2C1 |
| 3 | SI8384PM-IU | SamacSys_Parts:SOP64P600X175-20N | IC1, IC2, IC7 |
| 2 | 1.8V | SamacSys_Parts:SOD3716X135N | D8, D9 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C11 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3, C4 |
| 2 | 1EDI60H12AHXUMA1 | SamacSys_Parts:SOIC127P1030X265-8N | IC4, IC5 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R42 |
| 2 | 5V+ GND | SamacSys_Parts:1963531 | 5V_supply1, 5VD_supply1 |
| 2 | GND RX TX | SamacSys_Parts:1963544 | UART_0, UART_1 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R38 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 12V+ GND | SamacSys_Parts:1963531 | 12V_supply1 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R43 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33 |
| 1 | 5V+ GND V_out | SamacSys_Parts:L06P400S05_footprint | J10 |
| 1 | DB25_Female | SamacSys_Parts:ID25S33E4GX00LF | EXT_CON1 |
| 1 | GND OUT IN | SamacSys_Parts:1963544 | flags1 |
| 1 | IGBT_1_Gate | SamacSys_Parts:1963531 | IGBT_1_Gate1 |
| 1 | IGBT_2_Gate | SamacSys_Parts:1963531 | IGBT_2_Gate1 |
| 1 | MAX22531AAP+ | SamacSys_Parts:SOP65P778X199-20N | IC3 |
| 1 | MCP3426-xMC | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm | U1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U2 |
| 1 | TPS7A2050PDBVR | SamacSys_Parts:SOT95P280X145-5N | IC6 |
| 1 | V GND | SamacSys_Parts:1963531 | FC_V1 |

OisinS13/FC_IP_rig
Code to control a FC rig based around a Powercell S2 24 cell PEMFC stack

OisinS13/FC_IP_rig
Code to control a FC rig based around a Powercell S2 24 cell PEMFC stack

OisinS13/FC_IP_rig
Code to control a FC rig based around a Powercell S2 24 cell PEMFC stack

OisinS13/FC_IP_rig
Code to control a FC rig based around a Powercell S2 24 cell PEMFC stack


Queens-Rocket-Engineering-Team/gse-control-node
The GSE control node is the control PCB for GSE systems to integrate with launch control. This includes actuator control, fan control, and a load cell reading.

prydin/toy-dac
A 1-bit ΔΣ stereo audio DAC implemented on a Xilinx 7-series FPGA (Digilent Cmod S7), driven from an I²S input.


birdybro/FPGA_Amp
FPGA based audiophile phono preamp and amp integrated unit idea. WIP

im-deltax/EMG-Human-Machine-Interface
Eight-channel EMG PCB research design for assistive human-computer interaction. PCB sources only; hardware and user validation pending.

ruckusmattster/xtm-led-driver
A HDR LED driver with ESPHome integration focused on driving a 36V 1.4A LED

It measures 191.9 × 88.8 mm and has 2 copper layers, 1.6 mm thick.
124 parts, built around the 1EDI60H12AHXUMA1, SI8384PM-IU, MAX22531AAP+ and TPS7A2050PDBVR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OisinS13/FC_IP_rig repository on GitHub, at the commit this page was made from: the board is Hardware/Load controller/controlCircuit.kicad_pcb and its schematic Hardware/CVM/iso_adc_cvm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).