Skip to the content
2 layers99.1 × 62 mmNebulizer, the printed circuit board in 3D

Stand-alone device for derivatizations and bioassays in planar chromatography

Size
99.1 × 62 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
42
Pads
135
Tracks, vias
363, 36
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Jan 2025
Updated
3 Feb 2026

Overview

Nebulizer is an open-source printed circuit board by OfficeChromatography, from the OfficeChromatography/Nebulizer20x10 repository on GitHub. It is a 2-layer board of 99.1 × 62 mm with 32 parts on 42 nets, routed with 363 tracks and 36 vias.

It is built around the MCP1407-E/P, L7805 and IRFR3410. Its parts include 8 resistors, 6 capacitors, 5 ICs, 4 connectors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

Do-it-yourself, stand-alone, open-source Nebulizer for up to 20 cm x 10 cm HPTLC plates.

Reference: Wolfgang Schwack, Johannes Schmidt, Thomas Nimmerfroh, Gertrud E. Morlock (2025). Do-it-yourself, stand-alone, open-source Nebulizer for derivatizations and bioassays in planar chromatography. Journal of Planar Chromatography – Modern TLC (2025) 38:383–389, https://doi.org/10.1007/s00764-025-00358-8

This repository contains the folders for the 3D parts, the electronics, and the firmware for the 20 cm x 10 cm nebulizer. [blocked]

For details and instructions consult the given reference.

[blocked]

Parts

32
QtyValueFootprintReferences
3180RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3
3Conn_01x02_PinConnector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_HorizontalJ1, J2, J3
3SC39-11SRWADisplay_7Segment:Sx39-1xxxxxU1, U2, U3
2470uCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC3, C6
2SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW1, SW2
10r1Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P20.32mm_HorizontalR5
1100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR7
1100nCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC4
1100uInductor_THT:L_Radial_D10.0mm_P5.00mm_Neosid_SD12_style3L1
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8
110rResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
110uCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC5
1180rResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR6
11N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD2
11nCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC2
1220nCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1
14k7Potentiometer_THT:Potentiometer_Piher_PT-10-V10_VerticalRV1
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_HorizontalJ4
1IRFI640Package_TO_SOT_THT:TO-220-3_VerticalQ1
1IRFR3410Package_TO_SOT_SMD:TO-252-2Q2
1L7805Package_TO_SOT_THT:TO-220-3_VerticalU5
1MCP1407-E_PMCP1407_E_P:DIP254P762X432-8U4
1P6KE 220ADiode_THT:D_5W_P12.70mm_HorizontalD1

Similar boards

  • 4 layers112 × 72 mmDk spot welder, the printed circuit board in 3D

    Dk spot welder

    sini6a/spotwelder

    An easy-to-assemble, through-hole spot welder capable of switching high currents for welding nickel strip to lithium-ion cells. Controlled by an ATtiny13 microcontroller.

    51 parts3
  • 2 layers110 × 60 mmArduino Spot Welder, the printed circuit board in 3D

    Arduino Spot Welder

    KaeptnBalu/Arduino_Spot_Welder_V3

    This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.

    74 parts207GPL-3.0
  • 2 layers115 × 77 mmArduino Spot Welder, the printed circuit board in 3D

    Arduino Spot Welder

    KaeptnBalu/Arduino_Spot_Welder_V4

    This is V4 of the Arduino Spot Welder. An Arduino based Spot Welder for battery welding

    67 parts108GPL-3.0
  • 2 layers110 × 60 mmArduino Spot Welder, the printed circuit board in 3D

    Arduino Spot Welder

    KaeptnBalu/Arduino_Spot_Welder_V2

    Arduino controlled Spot Welder for battery welding

    57 parts78GPL-3.0
  • 2 layersPogo object, the printed circuit board in 3D

    Pogo object

    nekonaute/pogobot

    Pogobot is an open-source open-hardware robotic platform for swarm robotics

    36 parts21
  • 2 layers40.6 × 110 mmEuropi surface mount, the printed circuit board in 3D

    Europi surface mount

    Allen-Synthesis/EuroPi

    EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

    92 parts584CC0-1.0
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers59.7 × 57.5 mmFunBox, the printed circuit board in 3D

    FunBox

    GuitarML/FunBox

    Stereo guitar pedal platform using Daisy Seed.

    61 parts289MIT

Questions

How big is the Nebulizer PCB?

It measures 99.1 × 62 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Nebulizer use?

32 parts, built around the MCP1407-E/P, L7805 and IRFR3410. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nebulizer KiCad files?

From the OfficeChromatography/Nebulizer20x10 repository on GitHub, at the commit this page was made from: the board is Electronics/KiCad/nebulizer.kicad_pcb and its schematic Electronics/KiCad/nebulizer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nebulizer design in my own project?

Its repository states no licence, so its author keeps all rights: ask OfficeChromatography before reusing the design.