2 layers97 × 100 mm
RFID board PANNEL
Octanis3/Octanis3-Electronics
Contains PCB files of the Owl Monitoring Device
285 parts2MIT
2 layers100 × 91 mm
Nestbox v1
Octanis3/Octanis3-Electronics2Contains PCB files of the Owl Monitoring Device
- Size
- 100 × 91 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 447
- Nets
- 62
- Pads
- 654
- Tracks, vias
- 828, 93
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 17 Jan 2017
- Updated
- 9 Feb 2019
Overview
Nestbox v1 is an open-source printed circuit board by Octanis3, from the Octanis3/Octanis3-Electronics repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 91 mm with 447 parts on 62 nets, routed with 828 tracks and 93 vias.
It is built around the TPS630250RNC, ABM11-142-27.120MHZ-T3 and NFM18PS105R0J3D, with the XFL4020-102MEC among its other parts. Its parts include 30 resistors, 29 capacitors, 7 inductors, 4 ICs and 3 diodes. It belongs with the MSP430 boards of this library.
Main components
4TPS630250RNC
UncategorisedTexas Instruments
ABM11-142-27.120MHZ-T3
SMD2016-4P-20℃~+70℃ 27.12MHz 40Ω 8pF ±10ppm ±10ppm SMD2016-4P Crystals ROHSAbraconCrystals
NFM18PS105R0J3D
SMD-4P,1.6x0.8mm-55℃~+105℃ 1uF 2A 30mΩ 6.3V ±20% SMD-4P,1.6x0.8mm Feed Through Capacitors ROHSMurataFeed Through Capacitors
XFL4020-102MEC
SMD,4x4mm10.8mΩ 11A 1uH 5.4A Magnetic Shielded Inductor ±20% SMD,4x4mm Power Inductors ROHSCoilcraftPower Inductors
README
README.md# Octanis3-Electronics
Contains PCB files of the Owl Monitoring Device. More information on http://nestbox.octanis.org/
Folders
- _admin: General administrative documents (e.g. Sponsoring documents, Project proposals etc.)
- Nestbox_v1: First PCB version with Lighbarrier, 13MHz RFID, (untested) LORA module
- Nextbox_v2: Second PCB version using 125-134 kHz RFID
Dependencies
- Created with KiCAD 4.0.4 stable
- BOM created with bom2groupedCsv.xsl plugin by Wolf Walter.
- Schematic parts managed with https://github.com/BPJWES/KiCAD_Partslist_editor
2017
Parts
447| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | DNP | Resistors_SMD:R_0603 | R3, R4, R9, R12, R15, R17, R23, R29 |
| 5 | CERAMIC-100NF-50V-10%-X7R_0603_ | SeeedOPL-Capacitor-2016:C0603 | C1, C5, C9, C18, C29 |
| 5 | SMD-RES-3.3K-1%-1_10W_0603_ | SeeedOPL-Resistor-2016:R0603 | R8, R11, R16, R19, R20 |
| 4 | CERAMIC-100PF-50V-5%-NPO_0603_ | SeeedOPL-Capacitor-2016:C0603 | C12, C13, C15, C16 |
| 4 | DNP | Capacitors_SMD:C_0603 | C20, C21, C24, C25 |
| 4 | SMD-RES-0R-5%-1_10W_0603_ | SeeedOPL-Resistor-2016:R0603 | R10, R13, R14, R18 |
| 3 | SMD-RES-10K-1%-1_10W_0603_ | SeeedOPL-Resistor-2016:R0603 | R7, R26, R30 |
| 2 | 560nH | Resistors_SMD:R_0805 | L3, L4 |
| 2 | 742792042 | Resistors_SMD:R_0805 | L2, L5 |
| 2 | CERAMIC-10NF-50V-10%-X7R_0603_ | SeeedOPL-Capacitor-2016:C0603 | C11, C17 |
| 2 | CERAMIC-10PF-50V-5%-NPO_0603_ | SeeedOPL-Capacitor-2016:C0603 | C6, C8 |
| 2 | CERAMIC-10UF-25V-10%-X5R_0805_ | SeeedOPL-Capacitor-2016:C0805 | C4, C26 |
| 2 | CERAMIC-12PF-50V-5%-NPO_0603_ | SeeedOPL-Capacitor-2016:C0603 | C2, C3 |
| 2 | CERAMIC-1UF-25V-10%-X7R_0603_ | SeeedOPL-Capacitor-2016:C0603 | C10, C14 |
| 2 | CERAMIC-22UF-6.3V-20%-X5R_0805_ | SeeedOPL-Capacitor-2016:C0805 | C27, C28 |
| 2 | CERAMIC-47PF-50V-5%-NP0_0402_ | SeeedOPL-Capacitor-2016:C0402 | C19, C22 |
| 2 | JUMPER | Socket_Strips:Socket_Strip_Straight_1x02 | JP1, JP2 |
| 2 | POT | pot:3223G | RV1, RV2 |
| 2 | R_OPTO | Resistors_SMD:R_0603 | R2, R28 |
| 2 | SFH 3605 | Octanis3:MIDLED_phototransistor | Q1, Q2 |
| 2 | SMD-RES-1K-5%-1_10W_0603_ | SeeedOPL-Resistor-2016:R0603 | R5, R6 |
| 2 | SMD-RES-330R-1%-1_10W_0603_ | SeeedOPL-Resistor-2016:R0603 | R21, R22 |
| 1 | 180k | Resistors_SMD:R_0603 | R25 |
| 1 | 47K | SeeedOPL-Resistor-2016:R0603 | R27 |
| 1 | 742792093 | Resistors_SMD:R_0805 | L6 |
| 1 | 82pF | Capacitors_SMD:C_0603 | C23 |
| 1 | ABM11-142-27.120MHz | Octanis3:Crystal_ABM11-142 | Y2 |
| 1 | ANTENNA-CONN-U-FL_3P_ | SeeedOPL-Connector-2016:U-FL3P-SMD-2.6X2.6X1.0MM | ANT_UHF1 |
| 1 | Battery | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | BAT GND |
| 1 | CERAMIC-1NF-50V-10%-X7R_0603_ | SeeedOPL-Capacitor-2016:C0603 | C7 |
| 1 | CR95HF | Octanis3:VFQFPN32 | U2 |
| 1 | Crystal | SeeedOPL-Crystal Oscillator-2016:X2-SMD-L2.0X1.2X0.55MM | Y1 |
| 1 | LIGHT_BARRIER1 | Socket_Strips:Socket_Strip_Straight_1x02 | PB1 |
| 1 | LIGHT_BARRIER2 | Socket_Strips:Socket_Strip_Straight_1x02 | PB2 |
| 1 | LOGO | Octanis3:octanis3_logo | G*** |
| 1 | LOGO | Octanis3:octanis_open_incubator_logo | G*** |
| 1 | MSP430FR5969 | chips:S-PVQFN-N48 | U1 |
| 1 | NFC_PWR_SEL | Socket_Strips:Socket_Strip_Straight_1x03 | BAT/VA/3V3 |
| 1 | NFC_antenna | Octanis3:NFC_ANTENNA_CIRC | ant1 |
| 1 | NFM18PS105R0J3D | murata-filter:NFM18PS | FI1 |
| 1 | RN2483 | Octanis3:RN2483 | U4 |
| 1 | RX/TX | Socket_Strips:Socket_Strip_Straight_1x02 | TX/RX |
| 1 | SFH 4646 | Octanis3:MIDLED | D1 |
| 1 | SMD-BUTTON_2P-3.0X2.5X1.2+0.4MM_ | SeeedOPL-Switch-2016:SW2-2.6-3.0X2.5X1.2+0.4MM | SW1 |
| 1 | SMD-FERRITE-BEAD-2500R-50MA_0603_ | SeeedOPL-Inductor-2016:L0603 | L1 |
| 1 | SMD-LED-CLEAR-BLUE_0603_ | SeeedOPL-LED-2016:LED-0603 | D3 |
| 1 | SMD-LED-CLEAR-GREEN_0603_ | SeeedOPL-LED-2016:LED-0603 | D2 |
| 1 | SMD-RES-100R-5%-1_10W_0603_ | SeeedOPL-Resistor-2016:R0603 | R1 |
| 1 | SMD-RES-560K-5%-1_10W_0603_ | SeeedOPL-Resistor-2016:R0603 | R24 |
| 1 | TPS630250RNC | Octanis3:RNC0014A | U3 |
| 1 | TST/RST | Socket_Strips:Socket_Strip_Straight_1x02 | TST/RST |
| 1 | VDD/GND | Socket_Strips:Socket_Strip_Straight_1x02 | 3V3/GND |
| 1 | XFL4020-102ME | Octanis3:XFL4020 | L7 |
The 94 most common of 447 parts.
More from Octanis3/Octanis3-Electronics
12- 2 layers85 × 60 mm
- 2 layers85 × 60 mm
- 2 layers59.9 × 34.5 mm
SolarPowerSupply
Octanis3/Octanis3-Electronics
Contains PCB files of the Owl Monitoring Device
51 parts2MIT - 2 layers24 × 34 mm
RFID BOARD EM4095
Octanis3/Octanis3-Electronics
Contains PCB files of the Owl Monitoring Device
33 parts2MIT - 2 layers52.8 × 95.5 mm
RFID MLX90109
Octanis3/Octanis3-Electronics
Contains PCB files of the Owl Monitoring Device
30 parts2MIT - 2 layers54 × 102.6 mm
RFID BOARD EM4095
Octanis3/Octanis3-Electronics
Contains PCB files of the Owl Monitoring Device
22 parts2MIT - 2 layers20 × 30.5 mm
RFID board for pannel
Octanis3/Octanis3-Electronics
Contains PCB files of the Owl Monitoring Device
22 parts2MIT - 2 layers54 × 102.6 mm
RFID MLX90109
Octanis3/Octanis3-Electronics
Contains PCB files of the Owl Monitoring Device
21 parts2MIT - 2 layers42.8 × 27.5 mm
- 2 layers41.1 × 22.3 mm
- 2 layers93 × 64 mm
LF antenna denser
Octanis3/Octanis3-Electronics
Contains PCB files of the Owl Monitoring Device
7 parts2MIT
Similar boards
- 4 layers130 × 74.7 mm
Stima V4 Slave R1 1
r-map/rmap
rete monitoraggio ambientale partecipativo documentation at https://doc.rmap.cc
289 parts55 - 4 layers105.5 × 63.5 mm
- 2 layers71.1 × 34.9 mm
MicroRek
CalPolySpaceSystems/circuitCAD
Circuit board designs and resources for Cal Poly Space Systems' avionics
64 parts - 4 layers109.2 × 47 mm
Arty a7-expansion
antmicro/arty-expansion-board
IO expansion board compatible with Digilent Arty A7
125 parts14Apache-2.0 - 4 layers101 × 51.5 mm
Quack core
HeyPCB/quack-core
Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.
138 parts1CERN-OHL-S-2.0 - 2 layers77.5 × 48.5 mm
- 4 layers45.2 × 41.2 mm
PDB Board 0.3
thejamesrhodes/Hyades-Flight-Computer
Full Hardware and Electronics design, Bare-metal GNC flight software for an actively attitude-controlled high-power rocket
71 parts1Apache-2.0 - 2 layers100 × 100 mm
Questions
How big is the Nestbox v1 PCB?
It measures 100 × 91 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nestbox v1 use?
447 parts, built around the TPS630250RNC, ABM11-142-27.120MHZ-T3, NFM18PS105R0J3D and XFL4020-102MEC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nestbox v1 KiCad files?
From the Octanis3/Octanis3-Electronics repository on GitHub, at the commit this page was made from: the board is Nestbox_v1/Nestbox_v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nestbox v1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).