Skip to the content
2 layers75 × 34.1 mmMANUFACTURE FINAL BLUETOOTH PCB, the printed circuit board in 3D

MANUFACTURE FINAL BLUETOOTH PCB

Nyir-ai/PCBWAY-ESP32

Sharing PCB design

Size
75 × 34.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
32
Pads
121
Tracks, vias
200, 24
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 May 2026
Updated
15 May 2026

Overview

MANUFACTURE FINAL BLUETOOTH PCB is an open-source printed circuit board by Nyir-ai, from the Nyir-ai/PCBWAY-ESP32 repository on GitHub. It is a 2-layer board of 75 × 34.1 mm with 29 parts on 32 nets, routed with 200 tracks and 24 vias.

It is built around the ESP32-C3-WROOM-02-H4, ESD9B3.3ST5G and BAT60A, with the 1N5819WS among its other parts. Its parts include 7 capacitors, 7 diodes, 3 resistors, 3 ICs and 3 connectors. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.

Main components

4

README

README.md

PCBWAY-ESP32

Sharing PCB design

Parts

29
QtyValueFootprintReferences
4100nFCapacitor_SMD:C_0805_2012MetricC13, C19, C20, C21
34.7uFCapacitor_SMD:C_0805_2012MetricC4, C17, C18
3ESD9B3.3ST5GDiode_SMD:D_SOD-923D1, D3, D4
2BAT60ADiode_SMD:D_SOD-323D6, D8
2R_USResistor_SMD:R_0805_2012MetricR5, R9
2SW_PushButton_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mmSW1, SW2
110kResistor_SMD:R_0805_2012MetricR13
11N5819WSDiode_SMD:D_SOD-323D2
1Conn_01x05_SocketConnector_Molex:Molex_PicoBlade_53047-0510_1x05_P1.25mm_VerticalJ2
1ESP32-C3-WROOM-02RF_Module:ESP32-C3-WROOM-02U6
1JST_2mm_LiPoConnector_TE-Connectivity:TE_440054-2_1x02_P2.00mm_VerticalJ1
1LEDLED_SMD:LED_0805_2012MetricD7
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U2
1SGM2212-3.3Package_TO_SOT_SMD:SOT-223U8
1SW_SPSTButton_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPinSW4
1Test_pointTestPoint:TestPoint_Pad_1.0x1.0mmTP3
1USB_C_Plug_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalP1
1VBUSTestPoint:TestPoint_Pad_1.0x1.0mmTP1
1VUSBTestPoint:TestPoint_Pad_1.0x1.0mmTP2

Similar boards

  • 4 layers100 × 75 mmOpenAirScope, the printed circuit board in 3D

    OpenAirScope

    emertcakir/OpenAirScope

    Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

    282 parts26MIT
  • 4 layers49.2 × 26.3 mmTvplug2, the printed circuit board in 3D

    Tvplug2

    pstiasny/tv-doom

    The detailed description of the build is described in this blog post:

    92 parts1GPL-2.0
  • 2 layers25.4 × 26 mmESP32-C3-DevBoard, the printed circuit board in 3D

    ESP32-C3-DevBoard

    21km43/ESP32-C3-DevBoard

    ESP32-C3 Development Board

    21 parts21
  • 2 layers80 × 50 mmDoorsys, the printed circuit board in 3D

    Doorsys

    fabiojmendes/doorsys-hardware

    Repo for storing the hardware designs for the doorsys system

    33 partsMIT
  • 2 layers66 × 60 mmCat feeder, the printed circuit board in 3D

    Cat feeder

    fxp/cat-feeder

    AI-agent-designed automatic cat feeder (ESP32-C3 + HX711 + motor): schematic, PCB (Gerber/BOM), firmware, enclosure, docs

    35 parts
  • 2 layers83.8 × 51 mmMega wifi, the printed circuit board in 3D

    Mega wifi

    jfryman/mw-cart

    MegaWiFi Mega Drive/Genesis Wi-Fi cartridge — Rev.C fork (TI TL16C550D UART, 20 MHz / 1.25 Mbaud). Upstream: gitlab.com/doragasu/mw-cart

    56 parts
  • 2 layers33 × 54.2 mmESP32-C3 Sensor, the printed circuit board in 3D

    ESP32-C3 Sensor

    pellematrose/ESP32-C3_Sensor

    Sensor Board to read PT100, show on Display, Broadcast over MQTT

    96 parts

Questions

How big is the MANUFACTURE FINAL BLUETOOTH PCB PCB?

It measures 75 × 34.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MANUFACTURE FINAL BLUETOOTH PCB use?

29 parts, built around the ESP32-C3-WROOM-02-H4, ESD9B3.3ST5G, BAT60A and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MANUFACTURE FINAL BLUETOOTH PCB KiCad files?

From the Nyir-ai/PCBWAY-ESP32 repository on GitHub, at the commit this page was made from: the board is MANUFACTURE FINAL BLUETOOTH PCB/MANUFACTURE FINAL BLUETOOTH PCB.kicad_pcb and its schematic MANUFACTURE FINAL BLUETOOTH PCB/MANUFACTURE FINAL BLUETOOTH PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MANUFACTURE FINAL BLUETOOTH PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask Nyir-ai before reusing the design.