

Avrsheild
this repo have all my repo desin
- Size
- 60 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 41
- Pads
- 108
- Tracks, vias
- 239, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 Aug 2025
- Updated
- 30 Aug 2025
Overview
Avrsheild is an open-source printed circuit board by NotorandXor256, from the NotorandXor256/PCBdegins repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 60 × 60 mm with 22 parts on 41 nets, routed with 239 tracks and 0 vias.
It is built around the ATMEGA328P-PU and CH340C. Its parts include 5 resistors, 5 connectors, 4 capacitors, 4 diodes and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
README
README.mdPCBdegins
this repo have all my repo desin
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5 |
| 4 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4 |
| 2 | 0.1uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 2 | 22pf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | ATmega328P-P | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Crystal | Crystal:Resonator-2Pin_W10.0mm_H5.0mm | Y1 |
| 1 | Power_pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 1 | SW_Push | Button_Switch_SMD:Nidec_Copal_SH-7040B | SW1 |
| 1 | USB-C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | portB | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J4 |
| 1 | portC | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | portD | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J2 |
Similar boards
- 2 layers185.4 × 152.4 mm

- 2 layers130 × 75 mm

Treasure box main
mtrunzo12/TreasureBox-build
Build along with a knock-to-unlock toy chest: firmware, KiCad files, parts lists and a parent checklist.
39 parts - 2 layers71.5 × 90 mm

ATmegae Water Controller
OmarAlsai/hydroponic-tomato-controller
An open-source, standalone microcontroller PCB and embedded control system designed to automate water circulation, safety monitoring, and PID-controlled nutrient dosing for hydroponic tomato crops.
23 parts - 2 layers113.8 × 51.6 mm

- 2 layers80 × 58 mm

Radio 2
Shya-Bubu/pocket-fm-radio
This repository contains the complete design and documentation for an FM Pocket Radio project, developed as part of the EE2050 Design Principles and Manufacturing Technologies module at the University of Peradeniya…
58 parts - 2 layers216 × 222 mm

Dasduino CORE Solder kit panel
SolderedElectronics/Dasduino-CORE-Solder-kit-hardware-design
Hardware design, BOM, gerbers and 3D files for Dasduino-CORE-Solder-kit designed by Soldered Electronics.
2,328 parts - 4 layers48.3 × 55.7 mm

TGC Core devboard Mega v1
ThatGuyCodes605/TGC-Core-328P-v1
A Arduino Uno Style board based around the ATMega-328P microcontroller
28 partsGPL-3.0 - 2 layers110 × 90 mm

Questions
How big is the Avrsheild PCB?
It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Avrsheild use?
22 parts, built around the ATMEGA328P-PU and CH340C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Avrsheild KiCad files?
From the NotorandXor256/PCBdegins repository on GitHub, at the commit this page was made from: the board is avrsheild/avrsheild.kicad_pcb and its schematic avrsheild/avrsheild.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Avrsheild design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).