
RH GripLogicBoard FreeJoy
NoPlanNomad/FlankerStick_PCB
PCB's designed for my Flanker Style DIY Hotas stick.

PCB's designed for my Flanker Style DIY Hotas stick.
LH HeadLogicBoard FreeJoy is an open-source printed circuit board by NoPlanNomad, from the NoPlanNomad/FlankerStick_PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 65.8 × 47.5 mm with 42 parts on 34 nets, routed with 367 tracks and 21 vias.
It is built around the 74HC165D. Its parts include 24 resistors, 9 connectors, 3 capacitors and 3 ICs.
PCB's designed for my Flanker Style DIY Hotas stick.
https://cults3d.com/en/3d-model/game/flanker-style-stick
https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/flanker-style-stick
| quantaty | Type:Value | Footprint |
|---|---|---|
| 2 | Capacitor : 0.1uF | 0805 |
| 9 | Resistor : 1K | 0805 |
| 2 | 74HC165 | TSSOP-16 |
| 2 | JST_XH:B5B-XH-A | P2.50 mm |
| 4 | JST_XH:B2B-XH-A | P2.50 mm |
| 2 | JST_XH:B7B-XH-A | P2.50 mm |
| quantaty | Type:Value | Footprint |
|---|---|---|
| 3 | Capacitor : 0.1uF | 0805 |
| 24 | Resitor : 1K | 0805 |
| 3 | 74HC165 | TSSOP-16 |
| 4 | JST_XH:B7B-XH-A | P2.50 mm |
| 4 | JST_XH:B2B-XH-A | P2.50 mm |
| 1 | JST_XH:B5B-XH-A | P2.50 mm |
| quantaty | Type:Value | Footprint |
|---|---|---|
| 1 | SS495A | TH |
| 1 | MCP3201 | SOIC 3.9 |
| 1 | JST_XH:B5B-XH-A | P2.50 mm |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R25, R26, R27, R28, R29 +8 |
| 4 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J6, J7, J9 |
| 4 | Conn_01x07 | Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J1, J2, J3, J10 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 3 | 74HC165 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1, U2, U3 |
| 3 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | M1, M2, M3 |
| 1 | Conn_01x06 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J8 |

NoPlanNomad/FlankerStick_PCB
PCB's designed for my Flanker Style DIY Hotas stick.

NoPlanNomad/FlankerStick_PCB
PCB's designed for my Flanker Style DIY Hotas stick.

NoPlanNomad/FlankerStick_PCB
PCB's designed for my Flanker Style DIY Hotas stick.

NoPlanNomad/FlankerStick_PCB
PCB's designed for my Flanker Style DIY Hotas stick.

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed


westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files

slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64


It measures 65.8 × 47.5 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the 74HC165D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NoPlanNomad/FlankerStick_PCB repository on GitHub, at the commit this page was made from: the board is LH_HeadLogicBoard_FreeJoy/LH_HeadLogicBoard_FreeJoy.kicad_pcb and its schematic LH_BreakLever_FreeJoy/LH_BreakLever_FreeJoy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).