Skip to the content
4 layers128.8 × 67 mmKick, the printed circuit board in 3D

Design of a system that grab the data from an image sensor to an fpga

Size
128.8 × 67 mm
Copper layers
4
Thickness
1.61 mm
Parts
15
Nets
160
Pads
317
Tracks, vias
1,296, 100
Pours
163
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Jun 2024
Updated
29 Sep 2024

Overview

Kick is an open-source printed circuit board by Nizaro, from the Nizaro/fpga2C repository on GitHub. It is a 4-layer board of 128.8 × 67 mm with 15 parts on 160 nets, routed with 1,296 tracks and 100 vias.

It is built around the NX3L4053PW and MIC5504-1.8YM5-TR. Its parts include 6 connectors, 3 ICs and 2 capacitors. It belongs with the sensors and measurement and fPGA and programmable logic boards of this library.

Main components

2

README

README.md

fpga2C

Design of a system that grab the data from an image sensor to an fpga

Repo structure

/Materiel.ods - initial research on which board to use (as well as cameras.) /Pinout.ods - signal assignation in the design (HDL signal name, ZTurn pin name, and header pin number), as well as trace lengths and differential skew in the PCB.

/JLCPCB_Multilayer - an example Kicad project containing the appropriate constraints for a JLCPCB order. /Kick - the main KiCad project, containing the schematic, the PCB and its output products, and custom component libraries. /PCB-Output-Products - contains the output products (Gerbers and drill files) of the two main PCBs

/ZTurnV2 - the main Vivado project. /archive - old versions of IPs handy to keep around. /constraints - constraint files for the ZTurnV2 board, to be used if elaboration I/O planning fails. /drivers - preliminary folder containing software drivers for custom IPs. /interface_repo - contains the custom-made LVDS interface specification. /ip_repo - contains the custom IPs. /infos_vivado - miscellaneous files for Vivado installation and debugging. /petalinux - the PetaLinux build and working directory. /sd_backup - a backup of the factory boot image found in the SD card of the ZTurnV2, and its Linux device tree for reference. /vitis_workspace - the main Vitis workpace, containing the hardware platform and the application for software development.

/doc - main documentation folder. /doc/PCB_LVDS - useful guidelines for designing PCBs with LVDS or HF capabilities. /doc/Vivado_AXI - product guides for used IPs and AXI interface specs. /doc/ZTurnV2 - schematics and manuals for the ZTurnV2 and associated devices. /doc/Zynq7 - info for developing for the Zynq7. /doc/capteur_lentille - info about the sensor and the lens.

Parts

15
QtyValueFootprintReferences
21uFCapacitor_SMD:C_0603_1608MetricC1, C2
2Conn_02x10_Odd_EvenSAMTEC_TFML11002LDLC:SAMTEC_TFML-110-02-L-D-LC-TRJ4, J6
2Conn_02x15_Odd_EvenSAMTEC_TFML11502LDLC:SAMTEC_TFML-115-02-L-D-LCJ3, J5
2NX3L4053NX3L4053PW_118:SOP65P640X110-16NU2, U3
1CN1 / J11TFM-140-12-L-D-A:SAMTEC_TFM-140-12-L-D-AJ1
1CN2 / J12TFM-140-12-L-D-A:SAMTEC_TFM-140-12-L-D-AJ2
1MIC5504-1.8YM5Package_TO_SOT_SMD:SOT-23-5U4

The 11 most common of 15 parts.

More from Nizaro/fpga2C

1
  • 4 layers29 × 37.8 mmPythonBreakout, the printed circuit board in 3D

    PythonBreakout

    Nizaro/fpga2C

    Design of a system that grab the data from an image sensor to an fpga

    15 parts1

Similar boards

  • 4 layers97.2 × 82.7 mmPlainDAQ v01, the printed circuit board in 3D

    PlainDAQ v01

    AlperenAkkuncu/PlainDAQ

    An Open Source DAQ module for Raspberry Pi Pico

    90 parts208
  • 2 layers100 × 68 mmSI4684 SMD, the printed circuit board in 3D

    SI4684 SMD

    PE5PVB/SI4684-DAB-Receiver

    SI4684 ESP32 DAB Receiver

    91 parts135GPL-3.0
  • 4 layers36.8 × 38.1 mmCm4 ipad display adapter, the printed circuit board in 3D

    Cm4 ipad display adapter

    EvanKrall/pipad

    A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.

    29 parts60
  • 2 layers120.1 × 58.9 mmRte, the printed circuit board in 3D

    Rte

    3mdeb/rte-schematics

    Remote Test Evironment (RTE) sechematics.

    77 parts8
  • 2 layers49 × 47 mmGNI plutoclocker, the printed circuit board in 3D

    GNI plutoclocker

    cr1tbit/GNI-plutoclocker

    This device serves a couple of roles: allowing clocking adalm-pluto by an external clock source of broad frequency range injecting clock signal into RF trace, for clocking modded LNB supplying LNB with DC voltage…

    72 parts6MIT
  • 4 layersCm4 ipad display adapter, the printed circuit board in 3D

    Cm4 ipad display adapter

    EvanKrall/cm4_ipad_display_adapter

    Circuit that converts the video outputs of the Raspberry Pi CM4 to the DisplayPort and LVDS signals the iPad 1 wants.

    16 parts6
  • 4 layers87.2 × 22.6 mmSagittarius S1, the printed circuit board in 3D

    Sagittarius S1

    GeneralSyb/Sagittarius-Headtracker

    Project files for the Sagittarius S1 Prototype

    45 parts6MIT
  • 4 layers23 × 41 mmColorlight usb phy pmod, the printed circuit board in 3D

    Colorlight usb phy pmod

    festlv/colorlight-usb-phy-adapter

    USB3315/7C phy breakout board for colorlight i5 development board

    25 parts5MIT

Questions

How big is the Kick PCB?

It measures 128.8 × 67 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Kick use?

15 parts, built around the NX3L4053PW and MIC5504-1.8YM5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kick KiCad files?

From the Nizaro/fpga2C repository on GitHub, at the commit this page was made from: the board is Kick/MainBoard/MainBoard.kicad_pcb and its schematic Kick/MainBoard/MainBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kick design in my own project?

Its repository states no licence, so its author keeps all rights: ask Nizaro before reusing the design.