
Breakout 112pin Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit

Rocket solder is an open-source printed circuit board by Nitish5196, from the Nitish5196/RockerPCB-solder repository on GitHub. It is a 2-layer board of 73.7 × 87.6 mm with 42 parts on 25 nets, routed with 232 tracks and 10 vias.
Its parts include 11 resistors, 8 transistors, 6 diodes, 2 capacitors and 1 IC.
A rocket shaped PCB which vibrates and lights up (flashing to imitate a lauching rocket) when the button is pressed , it can be used as a cool looking keychain
BOM(Bill Of Materials):
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 6 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R8, R9, R10 |
| 5 | LED | LED_THT:LED_D5.0mm | D1, D3, D4, D5, D6 |
| 4 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R11 |
| 2 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1, BT2 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C2 |
| 1 | 47k | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R1 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | LM555xN | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | LOGO | Rocket_solder:github | G*** |
| 1 | LOGO | Rocket_solder5:hmm | |
| 1 | LOGO | Rocket_solder:maskcopper-HC | G*** |
| 1 | LOGO | Rocket_solder:moon, | |
| 1 | LOGO | Rocket_solder:github2 | G*** |
| 1 | LOGO | Rocket_solder2:copper-HC | G*** |
| 1 | LOGO | Rocket_solder3:qr_insta | G*** |
| 1 | LOGO | Rocket_solder2:purrrr | G*** |
| 1 | LOGO | Rocket_solder2:stardancefinal | |
| 1 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | POWER | LED_THT:LED_D5.0mm | D2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 73.7 × 87.6 mm and has 2 copper layers, 1.6 mm thick.
42 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Nitish5196/RockerPCB-solder repository on GitHub, at the commit this page was made from: the board is PCB/Rocket_solder.kicad_pcb and its schematic PCB/Rocket_solder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Nitish5196 before reusing the design.