
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

ID Card is an open-source printed circuit board by NipunD58, from the NipunD58/ID-Card repository on GitHub. It is a 2-layer board of 74 × 99.8 mm with 19 parts on 18 nets, routed with 130 tracks and 6 vias.
It is built around the NE555P. Its parts include 10 diodes, 2 capacitors, 2 resistors and 2 ICs.
Made for an event in my school, nothing much, just a simple LED chaser made with 555 timer IC and CD4017BE IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 1 | +5V | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H2 |
| 1 | 0.01uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 4017 | cd:N16 | U2 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 50K | Potentiometer_THT:Potentiometer_Bourns_3296X_Horizontal | RV1 |
| 1 | Gnd | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 74 × 99.8 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NipunD58/ID-Card repository on GitHub, at the commit this page was made from: the board is PCB/idcard.kicad_pcb and its schematic PCB/idcard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NipunD58 before reusing the design.