Skip to the content
2 layers100 × 100 mmPCB 1, the printed circuit board in 3D

Proyecto taller de ingenieria unal 2024-1

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
36
Pads
88
Tracks, vias
177, 12
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 Aug 2024
Updated
26 Sep 2024

Overview

PCB 1 is an open-source printed circuit board by Nigonzalezf, from the Nigonzalezf/Simons-Piano repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 14 parts on 36 nets, routed with 177 tracks and 12 vias.

It is built around the PAM8403. Its parts include 6 connectors, 3 ICs and 1 switch. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

Simon's Piano

Proyecto taller de ingeniería electrónica unal 2024-1

Parts

14
QtyValueFootprintReferences
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ3
1BatteryBattery:BatteryHolder_MPD_BH-18650-PC2BT1
1BotonesConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ5
1Botones 2Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ6
1BuzzerBuzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mmBZ1
1ESP32-DEVKIT-V1ESP 32 DEVKIT 1:MODULE_ESP32_DEVKIT_V1U1
1LEDSConnector:FanPinHeader_1x03_P2.54mm_VerticalJ1
1PAM8403PAM 8403:pam8403U2
1PantallaConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ2
1SW_SPDTButton_Switch_THT:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfileSW1
1TeclasConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4
1mh-cd42CD42:mh-cd42U3

The 12 most common of 14 parts.

More from Nigonzalezf/Simons-Piano

1
  • 2 layers70 × 30 mmPCBS 2, the printed circuit board in 3D

    PCBS 2

    Nigonzalezf/Simons-Piano

    Proyecto taller de ingenieria unal 2024-1

    14 parts1MIT

Similar boards

  • 2 layers57 × 97 mmMainCollar, the printed circuit board in 3D

    MainCollar

    plyalex/OpenFence

    OpenFence is an open source GPS based digital livestock fencing system and web interface, aiming to reduce barriers of using cell grazing.

    78 parts28GPL-3.0
  • 2 layers92.5 × 82.8 mmRifle and sensors, the printed circuit board in 3D

    Rifle and sensors

    DAlexis/caustic-lasertag-system

    Caustic project is a full-featured indoor and outdoor lasertag system

    268 parts16
  • 2 layers95.5 × 104.6 mmFmRadio, the printed circuit board in 3D

    FmRadio

    TeknoTrek/Arduino-Nano-FM-Radio-Si4703

    Part of the Teknotrek YouTube channel, this repository includes KiCad files for an FM Radio project using Arduino Nano, Si4703, and other components.

    16 parts7
  • 2 layers68.3 × 31.5 mmModuleo pam8403, the printed circuit board in 3D

    Moduleo pam8403

    johnnycubides/pam8403-module-kicad-lib

    Library kicad for pam8403 module

    5 parts3
  • 2 layers137.5 × 51 mmLark, the printed circuit board in 3D

    Lark

    tmshlvck/lark-hw

    Lark PCB

    112 parts3GPL-3.0
  • 2 layers85 × 52 mmIntercom, the printed circuit board in 3D

    Intercom

    aluisioalves123/rf-intercom

    Interfone de apertar para falar, sem fio: as duas unidades conversam por rádio (nRF24L01+ com antena) e só precisam de uma tomada.

    32 parts2
  • 2 layers96.5 × 105.4 mmMini Record Player Clock, the printed circuit board in 3D

    Mini Record Player Clock

    anadskman/Mini-Record-Player-Clock

    A compact desktop Bluetooth speaker and clock inspired by a vintage record player. The aim of this project is to combine a functional Bluetooth speaker and Wi-Fi clock into a clean, fully 3D printed desktop display.

    38 parts1
  • 2 layers85.6 × 54 mmCardtaiko, the printed circuit board in 3D

    Cardtaiko

    Milk-Cool/cardtaiko

    osu!taiko simulator in a card form-factor!

    24 parts1MIT

Questions

How big is the PCB 1 PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PCB 1 use?

14 parts, built around the PAM8403. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCB 1 KiCad files?

From the Nigonzalezf/Simons-Piano repository on GitHub, at the commit this page was made from: the board is PCBs/PCB 1/PCB 1.kicad_pcb and its schematic PCBs/PCB 1/Libs/Pam8403/pam8403.pretty/PCB 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCB 1 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).