

Automatic Fish Feeder
- Size
- 72.5 × 13.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 39
- Pads
- 139
- Tracks, vias
- 316, 45
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Feb 2026
- Updated
- 15 Feb 2026
Overview
Automatic Fish Feeder is an open-source printed circuit board by NicholasMaryArchana, from the NicholasMaryArchana/Automatic-Fish-Feeder-PCB repository on GitHub. It is a 2-layer board of 72.5 × 13.5 mm with 33 parts on 39 nets, routed with 316 tracks and 45 vias.
It is built around the ATMEGA328P-PU, L7805 and NE555D, with the BC547 among its other parts. Its parts include 12 resistors, 5 switches, 4 capacitors, 4 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsNE555D
SOIC-80℃~+70℃ 10mA 4.5V~16V SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / CountersBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10kΩ | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R2, R3, R4, R5, R9, R11 |
| 3 | SW_Push | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW2, SW3, SW4 |
| 2 | 1kΩ | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R6, R10 |
| 2 | 330Ω | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1, R12 |
| 2 | 33pF | Capacitor_SMD:C_Elec_4x5.8 | C2, C3 |
| 2 | 4.7kΩ | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R7, R8 |
| 1 | +12v | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1 |
| 1 | 100µF | Capacitor_SMD:CP_Elec_3x5.3 | C1 |
| 1 | 12 MHz | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 1 | 12V | Battery:BatteryHolder_Eagle_12BH611-GR | BT1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Wide | Q1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_CUI_CST-931RP-A | BZ1 |
| 1 | C | Capacitor_SMD:C_Elec_4x5.8 | C5 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | LOGO | LOGO | G*** |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | RC1602A | Display:RC1602A | U3 |
| 1 | Relay_SPDT | Relay_THT:Relay_SPDT_Schrack-RT1-16A-FormC_RM5mm | K1 |
Similar boards
- 2 layers55 × 485 mm

- 2 layers110 × 50 mm

- 2 layers200 × 62 mm

DC DC Buck Converter
joshishreyas320/DC-DC-Buck-Converter-Using-IC-555-Timer-PCB-Design
DC-DC boost converter using NE555 timer IC in astable mode to step up 6V DC to 36V DC. Drives a BC547/BC557 BJT switching pair, inductor energy storage, and 1N4004 freewheeling diode.
15 parts - 2 layers41 × 29.5 mm

- 2 layers66.3 × 20.8 mm

DAY5 PCB
Dipanjanbakshi/PCB-Designing
Some practice projects I made while learning PCB designing on Ki Cad!
13 parts - 2 layers57.5 × 25.6 mm

- 2 layers66 × 33.4 mm

MotionDetector 555Timer
ravilpatel/PCB-Design-in-KiCAD
This repository contains the KiCAD 9.0 project files, documentation and assets for a compact 2-layer PCB built around an STM32 microcontroller.
24 parts - 2 layers94.4 × 90 mm

Saturation Tester
EliMattingly22/Inductor_Saturation_Tester
A circuit to check the saturation level of different inductor cores
78 parts2MIT
Questions
How big is the Automatic Fish Feeder PCB?
It measures 72.5 × 13.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Automatic Fish Feeder use?
33 parts, built around the ATMEGA328P-PU, L7805, NE555D and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Automatic Fish Feeder KiCad files?
From the NicholasMaryArchana/Automatic-Fish-Feeder-PCB repository on GitHub, at the commit this page was made from: the board is Automatic Fish Feeder.kicad_pcb and its schematic Automatic Fish Feeder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Automatic Fish Feeder design in my own project?
Its repository states no licence, so its author keeps all rights: ask NicholasMaryArchana before reusing the design.