
BlinkenController V1
NeoCortex97/BlinkenRelay
A project to have cheap and simple control over 24V Outputs

A project to have cheap and simple control over 24V Outputs
BlinkenRelay V1 is an open-source printed circuit board by NeoCortex97, from the NeoCortex97/BlinkenRelay repository on GitHub, published under the MIT licence. It is a 2-layer board with 68 parts on 44 nets.
Its parts include 8 resistors, 8 diodes and 4 connectors.
A project to have cheap and simple control over 24V Outputs
| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18, JP19, JP20, JP21, JP22, JP23 +32 |
| 8 | 12.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED Low current | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 3 | Conn_01x02_Socket | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical | J10, J11, J12 |
| 1 | Conn_02x07_Odd_Even | Connector_IDC:IDC-Header_2x07_P2.54mm_Latch_Vertical | J9 |

NeoCortex97/BlinkenRelay
A project to have cheap and simple control over 24V Outputs

NeoCortex97/BlinkenRelay
A project to have cheap and simple control over 24V Outputs

NeoCortex97/BlinkenRelay
A project to have cheap and simple control over 24V Outputs




Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)


pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller


GregTurbo/Open-Frame1
An open-source rectangle hardware project for smash, prioritizing ease of assembly and cost
68 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NeoCortex97/BlinkenRelay repository on GitHub, at the commit this page was made from: the board is BlinkenRelay_V1/BlinkenRelay_V1.kicad_pcb and its schematic BlinkenController_V1/BlinkenController_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).