

Josukey
A keyboard for Joey
- Size
- 115.2 × 89.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 58
- Pads
- 570
- Tracks, vias
- 1,568, 113
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 Mar 2023
- Updated
- 1 May 2023
Overview
Josukey is an open-source printed circuit board by Narkoleptika, from the Narkoleptika/josukey repository on GitHub, published under the MIT licence. It is a 2-layer board of 115.2 × 89.5 mm with 58 parts on 58 nets, routed with 1,568 tracks and 113 vias.
Its parts include 36 diodes and 19 switches. It belongs with the keyboards and input boards of this library.
README
README.mdJosukey
A keyboard for Joey
This is an ergogen based corne clone that I intend to modify and tweak as I descend into the rabbit hole
V1
Prerequisites
- Node
- Docker
Getting Started
Get my files on your computer 😏 and install dependencies.
git clone https://github.com/Narkoleptika/josukey.git
cd josukey
npm iErgogen
Build
This will run Ergogen and build all of the output files.
npm run ergogen:buildWatch
This will watch the config.yaml file and the footprints directory and run the build command whenever there are changes.
npm run ergogen:watchZMK
Init
Downloads ZMK dependencies
npm run zmk:updateBuild
Builds the ZMK firmware
npm run zmk:buildDown
Shuts down the ZMK docker services
npm run zmk:downThanks
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | WS2812B | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18 +2 | |
| 18 | PG1350 | S1, S2, S3, S4, S5, S6, S7, S10, S11, S12, S13, S14, S15, S16, S17, S18 +2 | |
| 18 | Nexperia_CFP3_SOD-123W | Diode_SMD:Nexperia_CFP3_SOD-123W | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 1 | ProMicro | MCU1 | |
| 1 | 434121025816 | S19 | |
| 1 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | _1 | |
| 1 | Button_Switch_SMD:SW_SPDT_PCM12 | T1 |
Similar boards
- 2 layers252.9 × 77.6 mm

- 2 layers50 × 50 mm

- 2 layers97.3 × 71 mm

ZynScreen v1.5
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
58 parts156 - 2 layers34 × 46 mm

- 2 layers148 × 81 mm

Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT - 2 layers53.3 × 36.3 mm

- 2 layers70 × 30.3 mm

Pico 2HP Audio
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
58 parts84 - 2 layers35.7 × 34.2 mm

Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
58 parts81MIT
Questions
How big is the Josukey PCB?
It measures 115.2 × 89.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Josukey use?
58 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Josukey KiCad files?
From the Narkoleptika/josukey repository on GitHub, at the commit this page was made from: the board is ergogen/kicad/josukey.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Josukey design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).