Skip to the content
2 layers73.9 × 57.7 mmRpi cm4-carrier template, the printed circuit board in 3D

Rpi cm4-carrier template

Narain-Vazquez/AeroGuard-Project1

Aeroguard Project

Size
73.9 × 57.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
166
Pads
299
Tracks, vias
566, 90
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Feb 2025
Updated
22 Jan 2026

Overview

Rpi cm4-carrier template is an open-source printed circuit board by Narain-Vazquez, from the Narain-Vazquez/AeroGuard-Project repository on GitHub. It is a 2-layer board of 73.9 × 57.7 mm with 31 parts on 166 nets, routed with 566 tracks and 90 vias.

It is built around the 74LVC1G07SE-7-MS, TPS63070RNMR and CST-931AP, with the F305-1A7H1-21022-E100 among its other parts. Its parts include 9 capacitors, 9 resistors, 7 connectors, 2 ICs and 2 diodes. It belongs with the computers and single-board computers boards of this library.

Main components

4

README

README.md

UIC Senior Design Project

PCB Design Contributors:

Narain Vazquez
Nico Gomez

Repository Description:

This repository specifically holds the contents of the electrical portion of the Aeroguard Project, including the schematics for our PCB design, power distribution, and system integration.

All included files are designed to work specifically with KiCad, and the project files created for this project can be found in the following directories:

  • libraries_v4 – contains custom KiCad libraries created for the project.
  • rpi-aeroguard-template_v4 – contains the KiCad project files and PCB templates for the Aeroguard design.

Aeroguard Description & Demo:

The Aeroguard Project is a senior design initiative focused on developing an autonomous aerial monitoring system. The system runs on a Linux-based platform and leverages YOLOv11 for real-time detection of fires, smoke, and safety equipment protocol. Video is streamed over RTMP, and the system can trigger alerts using speakers and lights to notify personnel of hazards or protocol violations.

The video demo showcases our Aeroguard prototype board in action. It demonstrates the fire detection feature, which triggers the speaker alerting system (note: the video itself has no audio).

Aeroguard Demo Prototype Board Image Detection

Raspberry Pi Compute Module 4 (CM4) Carrier Template

Rendered example of RPi CM4 Carrier Template PCB

Parts

31
QtyValueFootprintReferences
410uF10uf:G-21_MUR-MC2, C3, C4, C7
3220Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2, R9, R10
322uF22uf:CAP_CL10_SAM-MC6, C8, C9
20.1uF0.1uf:CAP_CL05_SAM-MC1, C5
210kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR3, R4
21kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR6, R7
2Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2, J4
2DF40C-100DS-0.4V_51_DF40C-100DS-0.4V_51_:HIROSE_DF40C-100DS-0.4V_51_J5, J7
11.5uHLQM2HPN1R5MG0L:INDC2520X100NL1
1365kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
168.1kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR5
174LVC1G07SE-7Package_TO_SOT_SMD:SOT-353_SC-70-5U2
1CST-931APCUI_CST-931AP.petty:CUI_CST-931APLS1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1LeftJ3
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ6
1F305-1A7H1-21022-E100AMPHENOL_F305-1A7H1-21022-E100.petty:AMPHENOL_F305-1A7H1-21022-E100J1
1LED GreenLED_THT:LED_D1.8mm_W3.3mm_H2.4mmD2
1LED RedLED_THT:LED_D1.8mm_W3.3mm_H2.4mmD1
1TPS63070RNMRbuckboost_footprint:VREG_TPS63070RNMRU1

Similar boards

  • 4 layers125 × 85 mmESP32 Educational Board, the printed circuit board in 3D

    ESP32 Educational Board

    nakul-biovaco/Embedsys-embedded-educational-board

    Industrial-grade ESP32-WROOM-32E educational development board (4-layer ENIG PCB, BQ24075 power-path, dual regulators, ST7789 IPS display & SHT40 sensor). 0 DRC certified.

    175 parts1
  • 4 layers47.1 × 45.3 mmMixed signal Board Rev D, the printed circuit board in 3D

    Mixed signal Board Rev D

    Akhilesh-design-02/STM32F407-Hardware-Design

    4-layer STM32F407 mixed-signal PCB design featuring I2C/I2S/USB interfaces, SGP40 & SHT40 sensors, power plane splits, and star grounding for noise isolation.

    92 parts
  • 4 layers55 × 14.7 mmMinCab, the printed circuit board in 3D

    MinCab

    merocle/mincab

    small carrier board for Raspberry Pi CM4

    41 parts180CC-BY-SA-4.0
  • 4 layers54.6 × 57.1 mmCM5 MINIMA, the printed circuit board in 3D

    CM5 MINIMA

    piecol/CM5_MINIMA_REV1

    CM5 LoRaWAN carrier board in a compact, feature-filled footprint

    98 parts63CERN-OHL-S-2.0
  • 2 layers114 × 102 mmRpi cm4-switch board, the printed circuit board in 3D

    Rpi cm4-switch board

    sequoia-hope/rpi-cm4-switch-board

    A Raspberry Pi (RPi) Compute Module 4 (CM4) Carrier Board with integrated gigabit switch

    94 parts45
  • 6 layers76 × 56 mmCM4 MANET, the printed circuit board in 3D

    CM4 MANET

    ties1887/Mesh-radio-Halow-LoRa

    Modular mesh radio system using Raspberry Pi + HaLow (802.11ah) + LoRa.

    122 parts40
  • 4 layers170 × 170 mmCM5IO, the printed circuit board in 3D

    CM5IO

    sanctuary-systems-com/rpi-cm5io-mini-itx

    A mini ITX board with PCIe x16 based on the Raspberry Pi Comput Module 5 IO board

    75 parts29CERN-OHL-P-2.0
  • 6 layers80.9 × 63 mmCM4IOv5, the printed circuit board in 3D

    CM4IOv5

    neatstranger/Pi-In-The-Skyy

    PoE Camera, Based on Raspberry Pi CM4

    69 parts24

Questions

How big is the Rpi cm4-carrier template PCB?

It measures 73.9 × 57.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rpi cm4-carrier template use?

31 parts, built around the 74LVC1G07SE-7-MS, TPS63070RNMR, CST-931AP and F305-1A7H1-21022-E100. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rpi cm4-carrier template KiCad files?

From the Narain-Vazquez/AeroGuard-Project repository on GitHub, at the commit this page was made from: the board is rpi-aeroguard-template_v4/rpi-cm4-carrier-template.kicad_pcb and its schematic rpi-aeroguard-template_v4/cm4-gpio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rpi cm4-carrier template design in my own project?

Its repository states no licence, so its author keeps all rights: ask Narain-Vazquez before reusing the design.