

Small General
- Size
- 80 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 60
- Pads
- 242
- Tracks, vias
- 434, 75
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Feb 2024
- Updated
- 22 Mar 2025
Overview
Small General is an open-source printed circuit board by Nanyang-Venture-Formula, from the Nanyang-Venture-Formula/Small-General repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 50 mm with 52 parts on 60 nets, routed with 434 tracks and 75 vias.
It is built around the STM32F072CBT6, TJA1042T/3/1J and AMS1117-3.3, with the AMS1117-5.0 and SS14 among its other parts. Its parts include 14 capacitors, 11 resistors, 6 diodes, 4 ICs and 3 switches. It belongs with the STM32 boards of this library.
Main components
5STM32F072CBT6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TJA1042T/3/1J
SOIC-8-40℃~+150℃ 15uA 4.5V~5.5V 5Mbps 70mA SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric | C102, C103, C104, C105, C106, C107, C108, C109, C110 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R101, R102, R103, R110 |
| 4 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C111, C112, C113, C114 |
| 3 | 300 | Resistor_SMD:R_0603_1608Metric | R105, R106, R107 |
| 3 | SS14 | Diode_SMD:D_SMA | D104, D105, D106 |
| 3 | SW_Push | NVF-Kicad:PushBtn_TS-1187A-B-A-B | SW101, SW102, SW103 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_2.5x2.5mm | TP101, TP102, TP103 |
| 2 | 10k | NVF-Kicad:RV_Bourns_3362 | RV101, RV102 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R104, R111 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R108, R109 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C101 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U103 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U104 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D103 |
| 1 | Fuse | NVF-Kicad:FUSE-Littelfuse_Nano2_154x | F101 |
| 1 | G*** | kibuzzard-65C10836 | kibuzzard-65C10836 |
| 1 | G*** | kibuzzard-65CCCB35 | kibuzzard-65CCCB35 |
| 1 | G*** | kibuzzard-65C10821 | kibuzzard-65C10821 |
| 1 | G*** | kibuzzard-65CCCADD | kibuzzard-65CCCADD |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D101 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP101 |
| 1 | LOGO | NVF-Kicad:NVF-Logo-30mm | G*** |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D102 |
| 1 | STM32F072CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U101 |
| 1 | TJA1042T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U102 |
| 1 | USB_C | NVF-Kicad:USBC_HRO_TYPE-C-31-M-12 | J101 |
| 1 | ~ | NVF-OwnParts:Small-General Actual | SG101 |
Similar boards
- 4 layers100 × 100 mm

- 4 layers100.9 × 71.5 mm

Raccoon
barbinbrad/raccoon
Car Hacking PCB and firmware for a USB to CAN interface, with support for 4 CAN transceivers and an optional NEO-MP8 GNSS module.
56 parts16MIT - 2 layers60 × 90 mm

- 2 layers80 × 50 mm

- 4 layers68.6 × 53.3 mm

- 2 layers71.8 × 48.5 mm

JOLT V1
GoTouchGra55/J.O.L.T
12 degrees of freedom, 1 custom devboard, and 0 off-the-shelf solutions. JOLT is a quadruped robot built entirely from scratch.
73 parts1MIT - 2 layers100 × 100 mm

Power supply
gabrielfbdiniz/PFC-Boost-STM32
Conversor estático de potência CA/CC com Correção Ativa do Fator de Potência (Active PFC) na topologia Boost, projetado para elevar a tensão da rede elétrica retificada (127V / 220V AC) para um barramento CC…
89 parts - 2 layers48 × 37 mm

Questions
How big is the Small General PCB?
It measures 80 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Small General use?
52 parts, built around the STM32F072CBT6, TJA1042T/3/1J, AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Small General KiCad files?
From the Nanyang-Venture-Formula/Small-General repository on GitHub, at the commit this page was made from: the board is HDK/SmallGeneral.kicad_pcb and its schematic HDK/SmallGeneral.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Small General design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).