Skip to the content
2 layers70.6 × 75 mmSingle Layer PCB, the printed circuit board in 3D

KiCad-based PCB design for a CAN Bus Protocol interface, featuring schematic capture, PCB layout, component placement, routing, and manufacturing documentation.

Size
70.6 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
10
Pads
78
Tracks, vias
60, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
14 Oct 2026
Updated
14 Oct 2026

Overview

Single Layer PCB is an open-source printed circuit board by Nandishreddyl, from the Nandishreddyl/CAN-BUS-Protocol-PCB-Design repository on GitHub. It is a 2-layer board of 70.6 × 75 mm with 5 parts on 10 nets, routed with 60 tracks and 0 vias.

It is built around the ESP32-C3-DEVKITM-1. It belongs with the interfaces and adapters boards and the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

CAN Bus Protocol PCB Design

Project Overview

This project focuses on designing a Printed Circuit Board (PCB) for a CAN (Controller Area Network) bus communication interface using KiCad. The objective is to develop a compact hardware platform for CAN-based communication in embedded systems and automotive applications.

The project involves schematic design, electronic component selection, PCB layout development, track routing, and preparation of manufacturing files. The PCB is intended to provide a structured hardware interface for integrating CAN communication circuitry with microcontroller-based systems.

Project Objectives

  • Design a CAN Bus Protocol interface PCB using KiCad.
  • Develop the circuit schematic and component connections.
  • Perform component placement and PCB track routing.
  • Understand CAN transceiver interfacing and CANH/CANL bus connections.
  • Apply PCB design practices for grounding, power distribution, and manufacturability.
  • Prepare Gerber and drill files for PCB fabrication.

Tools Used

  • EDA Software: KiCad
  • Schematic Design: KiCad Schematic Editor
  • PCB Layout: KiCad PCB Editor
  • PCB Routing: KiCad and FreeRouting, where applicable
  • Manufacturing Preparation: Gerber and drill-file generation

Applications

  • Embedded systems communication
  • Automotive electronics
  • Industrial control systems
  • Microcontroller-based CAN networks
  • Hardware prototyping and communication-interface development

Project Status

PCB design and documentation. Hardware fabrication, assembly, and functional testing should be documented separately once completed.

Author

Nandish Reddy L

Electronics and Communication Engineering

Interests: PCB Design, Embedded Systems, Digital VLSI, and Hardware Development.

Parts

5
QtyValueFootprintReferences
2ESP32-C3-DevKitM-1RF_Module:ESP32-C3-DevKitM-1ESP32-1, ESP32-1

The 2 most common of 5 parts.

Similar boards

  • 2 layers106.5 × 66 mmTry, the printed circuit board in 3D

    Try

    Ahmed-YSY/FleetGuard

    IoT vehicle telematics for fleet & logistics — ESP32 + SIM7600G 4G/GPS tracker with fuel-theft detection, tamper/cargo security alarms, offline-resilient MQTT reporting, and OBD2 data over ESP-NOW.

    18 parts6
  • 2 layers60 × 40 mmEsp ppo v2, the printed circuit board in 3D

    Esp ppo v2

    iho77/ppo_v2

    This work is licensed under a [Creative Commons Attribution-NonCommercial 4.0 International License][cc-by-nc].

    19 parts5
  • 2 layers226.3 × 90.5 mmClockclock main, the printed circuit board in 3D

    Clockclock main

    TiboDevC/clockclock

    Personal project of a kinetic clock inspired by Humans Since 1982, using 48 stepper motors to display time in an artistic and dynamic way.

    132 parts3GPL-3.0
  • 4 layers58 × 60 mmProject 6 esp32 solar prototype, the printed circuit board in 3D

    Project 6 esp32 solar prototype

    Abineshpk007/KICAD-solar_panel_monitoring_prototype

    This is my PCB, there are many outer like it but this is mine

    15 parts1
  • 2 layers115.4 × 66.5 mmCNC Router, the printed circuit board in 3D

    CNC Router

    diaxxu/CNC-Router

    a challenge i gave myself to make something great ! yes its a cnc milling / laser / plotter machine

    34 parts1MIT
  • 2 layersHail Mary, the printed circuit board in 3D

    Hail Mary

    saniyafatima07/Hail_Mary

    Lakshya: Low Cost Precision Guidance and Smart Electronic Fuze System

    11 parts1
  • 2 layers70.8 × 51.4 mmESS Bottom, the printed circuit board in 3D

    ESS Bottom

    shrimp-18/ESS-Wristband

    A hardware Project:- Wristband

    14 parts1
  • 2 layersControls, the printed circuit board in 3D

    Controls

    VladimirVladimirovMinkov/UOA_HPA

    This is a code and document repository for the University of auckland Aeronaughtics Club Human Powered Aircraft

    16 parts1

Questions

How big is the Single Layer PCB PCB?

It measures 70.6 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Single Layer PCB use?

5 parts, built around the ESP32-C3-DEVKITM-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Single Layer PCB KiCad files?

From the Nandishreddyl/CAN-BUS-Protocol-PCB-Design repository on GitHub, at the commit this page was made from: the board is Single_Layer_PCB.kicad_pcb and its schematic Single_Layer_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Single Layer PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask Nandishreddyl before reusing the design.