Skip to the content
2 layers42.5 × 15.2 mmRobot, the printed circuit board in 3D
Size
42.5 × 15.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
10
Pads
41
Tracks, vias
121, 17
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
27 Nov 2018
Updated
4 Mar 2024

Overview

Robot is an open-source printed circuit board by MultipedRobotics, from the MultipedRobotics/quadruped-AX12 repository on GitHub, published under the MIT licence. It is a 2-layer board of 42.5 × 15.2 mm with 10 parts on 10 nets, routed with 121 tracks and 17 vias.

It is built around the BSS138. Its parts include 5 connectors, 2 resistors, 2 ICs and 1 transistor. It belongs with the robots and motor control boards of this library.

Main components

1

README

electrical/power-v6/readme.md

Power Distribution Board

Schematic

pdf schematic

Board

Parts

10
QtyValueFootprintReferences
210kResistors_SMD:R_1206_HandSolderingR2, R3
2i2cPin_Headers:Pin_Header_Straight_1x04_Pitch2.54mmJ1, J4
112V/DataConnectors_Molex:Molex_SPOX-5267_22-03-5035_03x2.54mm_StraightJ3
15V/DataConnectors_Molex:Molex_SPOX-5267_22-03-5035_03x2.54mm_StraightJ6
174L-125TO_SOT_Packages_SMD:SOT-23-5_HandSolderingU2
174L-126TO_SOT_Packages_SMD:SOT-23-5_HandSolderingU3
1BSS138TO_SOT_Packages_SMD:SOT-23Q1
1Pi HeaderPin_Headers:Pin_Header_Straight_2x05_Pitch2.54mmJ2

More from MultipedRobotics/quadruped-AX12

1
  • 2 layers49.5 × 49.5 mmRobot, the printed circuit board in 3D

    Robot

    MultipedRobotics/quadruped-AX12

    25 parts6MIT

Similar boards

  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers21.6 × 52.3 mmPs2 pico hat, the printed circuit board in 3D

    Ps2 pico hat

    No0ne/ps2x2pico

    USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

    17 parts399MIT
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0
  • 4 layers74 × 104 mmBeepy, the printed circuit board in 3D

    Beepy

    sqfmi/beepy-hardware

    Beepy Hardware

    160 parts348MIT

Questions

How big is the Robot PCB?

It measures 42.5 × 15.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Robot use?

10 parts, built around the BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Robot KiCad files?

From the MultipedRobotics/quadruped-AX12 repository on GitHub, at the commit this page was made from: the board is electrical/rpi/robot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Robot design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).