2 layers88.9 × 98.4 mm
Kickstart switcher-12up
keirf/pcb-projects
The old Kickstart switcher documentation is here.
197 parts108CC0-1.0
2 layers90 × 90 mm
Sstc drsstc driver
MrSimranjitSingh/AcMains_TC- Size
- 90 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 80
- Nets
- 78
- Pads
- 276
- Tracks, vias
- 334, 9
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Dec 2024
- Updated
- 9 Dec 2024
Overview
Sstc drsstc driver is an open-source printed circuit board by MrSimranjitSingh, from the MrSimranjitSingh/AcMains_TC repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 90 × 90 mm with 80 parts on 78 nets, routed with 334 tracks and 9 vias.
It is built around the UCC27321P, UCC27322P and 74HC14, with the 74HC74D among its other parts. Its parts include 18 diodes, 16 capacitors, 16 connectors, 13 resistors and 8 ICs. It belongs with the ESP32 boards of this library.
Main components
4
UCC27321P
PDIP-8-40℃~+105℃ 1 20ns 20ns 4.5V~15V 9A 9A Low Side MOSFET PDIP-8 Gate Drivers ROHSTexas InstrumentsGate DriversUCC27322P
PDIP-8-40℃~+105℃ 1 20ns 20ns 25ns 35ns 4.5V~15V 9A 9A Low Side MOSFET PDIP-8 Gate Drivers ROHSTexas InstrumentsGate Drivers
74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInverters74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip Flops
Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 1N5819 | Diode_SMD:D_SOD-323 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 5 | 100n | Capacitor_SMD:C_1206_3216Metric | C1, C2, C8, C15, C16 |
| 4 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R10, R11, R12 |
| 4 | LED_Small_Filled | LED_THT:LED_D5.0mm_Clear | D15, D16, D17, D18 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_1206_3216Metric | R1, R2, R6 |
| 3 | 330u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3, C13, C14 |
| 3 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1, J6, J10 |
| 2 | 220k | Resistor_SMD:R_1206_3216Metric | R5, R7 |
| 2 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J15, J16 |
| 2 | DRSSTC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J8 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 1 | 100r | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 10u | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C6 |
| 1 | 10u@10v | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C11 |
| 1 | 12V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | 12V | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | 1N4007 | Diode_SMD:D_SOD-123 | D14 |
| 1 | 1n | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | 1r | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 20k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 22k | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | 24V | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J12 |
| 1 | 24V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 4.7u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 4N35 | Package_DIP:DIP-6_W7.62mm | U4 |
| 1 | 4k7 | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 74HC14 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | 74HC74 | Package_DIP:DIP-14_W7.62mm | U7 |
| 1 | ? | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | ESP32-DEVKIT-V1 | A_My_Library:MODULE_ESP32_DEVKIT_V1 | U5 |
| 1 | GDT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Int_esp | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U8 |
| 1 | LM7812_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U6 |
| 1 | LTE-99002 | A_My_Library:feedback_core | XFMR1 |
| 1 | L_Small | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P2.54mm_Vertical_Vishay_IM-1 | L2 |
| 1 | SSTC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | SSTC_DUMMY | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | UCC27321P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | UCC27322P | Package_DIP:DIP-8_W7.62mm | U3 |
Similar boards
- 4 layers69 × 74 mm
- 2 layers208 × 110 mm
- 4 layers220 × 170 mm
Arpeggiator
EwoudVV/arpeggiator
12-note analog arpeggiator with a 1/2/3 octave range, custom pcb and printed case
360 parts3 - 2 layers100 × 80 mm
- 2 layers190.5 × 127 mm
- 4 layers271.8 × 147.3 mm
- 2 layers144 × 100 mm
Questions
How big is the Sstc drsstc driver PCB?
It measures 90 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sstc drsstc driver use?
80 parts, built around the UCC27321P, UCC27322P, 74HC14 and 74HC74D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sstc drsstc driver KiCad files?
From the MrSimranjitSingh/AcMains_TC repository on GitHub, at the commit this page was made from: the board is kiCAD_files/sstc_drsstc_driver/sstc_drsstc_driver.kicad_pcb and its schematic kiCAD_files/sstc_drsstc_driver/power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sstc drsstc driver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).