
Stm32 f4xx minimal
amrithHN/stm32f4xx_minimal_dev
stm32f4 minimal dev board with few sensors

A custom-designed printed circuit board (PCB) for an STM32 microcontroller, featuring full schematic capture, layout, and manufacturing-ready fabrication files.
STM board is an open-source printed circuit board by MohamedHassanExp, from the MohamedHassanExp/STM-board repository on GitHub, published under the MIT licence. It is a 4-layer board of 48.6 × 40.6 mm with 51 parts on 83 nets, routed with 206 tracks and 82 vias.
It is built around the MP2359DJ-LF-Z, USBLC6-2SC6 and B5819W, with the AO3401A among its other parts. Its parts include 16 capacitors, 11 resistors, 5 connectors, 4 diodes and 3 ICs. It belongs with the STM32 boards of this library.
A custom-designed printed circuit board (PCB) for an STM32 microcontroller, featuring full schematic capture, layout, and manufacturing-ready fabrication files.
This project contains the complete hardware design files for a custom STM32-based development board. It serves as a physical hardware platform for embedded C programming, control systems testing, and peripheral integration. The board was routed with a focus on signal integrity, proper grounding, and efficient power distribution.
Follow these instructions to view or modify the hardware design files locally.
git clone https://github.com/MohamedHassanExp/STM-board.gitcd STM-board-mainstm board.kicad_pro project file using KiCad.The repository is organized to separate the editable design files from the static manufacturing outputs:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C9, C10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric | C1, C3, C4 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 2u2 | Capacitor_SMD:C_0201_0603Metric | C13, C14 |
| 2 | B5819W | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | Conn_01x04 | Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J3, J4 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 10u | Inductor_SMD:L_Sunlord_MWSA0518S | L1 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1K5 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 250mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 39n | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 600@600MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BLUE | LED_SMD:LED_0201_0603Metric | D4 |
| 1 | LOGO | LOGO | G*** |
| 1 | MP2359DJ | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | RED | LED_SMD:LED_0201_0603Metric | D3 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SWD | Connector_PinHeader_1.00mm:PinHeader_2x05_P1.00mm_Vertical | J2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J5 |
| 1 | input | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1 |

amrithHN/stm32f4xx_minimal_dev
stm32f4 minimal dev board with few sensors

majdbiw4200/STM32F405RGT-dev-board
STM32 + USB + Buck Converter PCB Design


pravinsharma15k-ops/STM32F4-Test-Board
STM32F405-based test board designed in KiCad 10, with buck converter, USB, SWD, I2C and UART.


fabiokurti/Laburator-i-integruar-final
🧪 STM32F1 Embedded Systems Assignments This repository contains schematic-based embedded system projects using STM32 microcontrollers.

kingMordred/STM32F4_buck_converter_pcb
PCB design using KiCad 10.0 for an STM32F4 with a buck converter, usb connection, USART and I2c communication lines with the microcontroller and an external clock.

ollieelliot/STM32-USB-I2C-Gyroscope
Connecting an STM32F405RG microcontroller with a gyroscope through I2C as well as connecting USB B Micro, SWD and USART in order to learn more about circuit and PCB design.
It measures 48.6 × 40.6 mm and has 4 copper layers, 1.6 mm thick.
51 parts, built around the MP2359DJ-LF-Z, USBLC6-2SC6, B5819W and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MohamedHassanExp/STM-board repository on GitHub, at the commit this page was made from: the board is stm board.kicad_pcb and its schematic stm board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).