
ControleurPulve
Mobilab-AgroTIC/debitdouille
Système pour controler le fonctionnement d'un pulvérisateur

Système pour controler le fonctionnement d'un pulvérisateur
ControleurPulve is an open-source printed circuit board by Mobilab-AgroTIC, from the Mobilab-AgroTIC/debitdouille repository on GitHub. It is a 4-layer board of 111.8 × 59.1 mm with 107 parts on 60 nets, routed with 481 tracks and 162 vias.
It is built around the TSR 2-2450, ADS1115IDGSR and PC817CS, with the BTS7004-1EPP, AR03BTC2501 and HB-PH3-25413PB2GOP among its other parts. Its parts include 28 resistors, 19 connectors, 18 capacitors, 9 ICs and 5 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Débitdouille est un système à construire soi-même permettant de suivre les paramètres de pulvérisation en temps réel.
Ces paramètres sont :
Tous ces paramètres sont affichés dans la cabine sur le smartphone (Android) du tractoriste via Bluetooth. Débitdouille a été développé par la CA34 et le mobilab AgroTIC dans le cadre du projet Occitanum. Il est maintenant largement amélioré par Furgo (furgo.fr)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 2k5 | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12, R19, R20, R21, R22, R23 |
| 8 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8, J9, J12, J13, J14, J15, J18, J19 |
| 6 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R13, R14, R24 |
| 5 | 150R .1% | Resistor_SMD:R_0805_2012Metric | R4, R25, R26, R27, R28 |
| 5 | TestPoint | Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | TP1, TP2, TP3, TP4, TP5 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C13, C18 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C4, C5, C7 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6, R15, R16 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R8, R17, R18 |
| 4 | PC817 | Package_DIP:DIP-4_W8.89mm_SMDSocket_LongPads | U5, U6, U7, U8 |
| 4 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-4-5.08_1x04_P5.08mm_Horizontal | J10, J11, J16, J17 |
| 4 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP3, JP4, JP6 |
| 4 | e | MountingHole:MountingHole_3.2mm_M3 | H4, H5, H6, H7 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2, FID3 |
| 3 | ~ | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C17 |
| 2 | 10uF X5R | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C16 |
| 2 | 10uF X5R | Capacitor_SMD:C_0805_2012Metric | C3, C6 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C9, C12 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5, JP7 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 470uF 50V | Capacitor_SMD:CP_Elec_8x10 | C2 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U4 |
| 1 | Analogique 0-3.3V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | BTS7004-1EPP | Package_SO:Infineon_PG-TSDSO-14-22 | U3 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J4 |
| 1 | Conn_01x06_Pin | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J7 |
| 1 | GPS | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J6 |
| 1 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523 | D2 |
| 1 | LOGO | logos:logoAgroticsmall | G*** |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | logos:logoCA34 | G*** |
| 1 | LOGO | logos:logoOccitanum | G*** |
| 1 | MRA4004T3G | Diode_SMD:D_SMA | D1 |
| 1 | RUILON SMD1812P050TF/30 | Diode_SMD:D_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J5 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TSR2-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR2-xxxx_THT | U1 |
| 1 | XIAO-ESP32-C6 | Esp32-XIAO:XIAO-ESP32C6-DIP | U2 |
| 1 | blue | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | ~ | Enclosures:EL161_box_enclosure_IDE | B1 |
| 1 | ~ | DIY_Modules:GY-NEO6MV2_25_36 | U9 |

Mobilab-AgroTIC/debitdouille
Système pour controler le fonctionnement d'un pulvérisateur


Gamecard/k2-plus-cm5
K2 Plus CM5 – Creality K2 Plus mit Upstream-Klipper auf einem Raspberry Pi CM5


Mehdi-Ldj/lora-ble-sensor-node
Off-grid LoRa/BLE sensor node — 868 MHz LoRa, 2.4 GHz BLE, solar/LiFePO4

PubInv/high-amp-controller-board
A PCB assembly for controlling up to 60 amps of power for electolysis of electroplating



It measures 111.8 × 59.1 mm and has 4 copper layers, 1.6 mm thick.
107 parts, built around the TSR 2-2450, ADS1115IDGSR, PC817CS and BTS7004-1EPP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Mobilab-AgroTIC/debitdouille repository on GitHub, at the commit this page was made from: the board is Pcb/ControleurPulve_kicad/V2/ControleurPulve.kicad_pcb and its schematic Pcb/ControleurPulve_kicad/V1/ControleurPulve.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Mobilab-AgroTIC before reusing the design.