Skip to the content
2 layers48.3 × 71.1 mmRFID, the printed circuit board in 3D
Size
48.3 × 71.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
44
Pads
113
Tracks, vias
137, 112
Pours
11
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
27 Feb 2023
Updated
19 May 2023

Overview

RFID is an open-source printed circuit board by MilanR312, from the MilanR312/RFID-IP repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.3 × 71.1 mm with 22 parts on 44 nets, routed with 137 tracks and 112 vias.

It is built around the 74LVC2G14GW. Its parts include 5 capacitors, 5 connectors, 3 ICs, 2 resistors and 1 inductor. It belongs with the radio and wireless boards of this library.

Main components

1

README

README.md

RFID-IP

Summary

Automatic inventory managment using a ultra high frequency rfid and postgres. Contains a website to control the esp and the schematics to rebuild.

folder structure

credits

Parts

22
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_4mmH1, H2, H3, H4
2100nFCapacitor_SMD:C_0805_2012MetricC1, C3
222µFCapacitor_SMD:C_0805_2012MetricC4, C5
110µFCapacitor_SMD:C_0805_2012MetricC2
13.9µHKiCad:SRR4828A3R9YL1
15K1Resistor_SMD:R_0805_2012MetricR2
15kPotentiometer_SMD:Potentiometer_Bourns_3214W_VerticalRV1
15k1Resistor_SMD:R_0805_2012MetricR3
174LVC2G14Package_TO_SOT_SMD:SOT-23-6U2
1AP63202WUPackage_TO_SOT_SMD:TSOT-23-6U1
1Conn UartConnector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_VerticalJ3
1Conn deurConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Conn motionConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1Conn_01x16_PinConnector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_VerticalJ4
1Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1
1USB_C_Receptacle_PowerOnly_6PUGent_standard_stock_Connector:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_HorizontalJ1
1~Library:espConnU3

Similar boards

  • 4 layers137 × 79.5 mmTGX4, the printed circuit board in 3D

    TGX4

    hexeguitar/TGX4

    Teensy 4 based guitar amp emulator

    297 parts66
  • 2 layers75 × 82 mmEsp8266-midi, the printed circuit board in 3D

    Esp8266-midi

    tadas-s/OSC2Midi

    ESP8266 based OSC <-> MIDI WiFi bridge

    33 parts34MIT
  • 4 layers210.8 × 74.9 mmBkm-10rlternative, the printed circuit board in 3D

    Bkm-10rlternative

    skumlos/bkm-10rlternative

    Project aiming to replicate the BKM-10R/11R remote for Sony professional CRT monitors.

    257 parts17
  • 4 layers47 × 27 mmSD Swap, the printed circuit board in 3D

    SD Swap

    Mr-Bossman/SD_Swap

    A development tool which swaps an sdcard between a usb3 card reader or a SBC.

    44 parts14
  • 2 layers66 × 51.5 mmWiFi Gate Controller, the printed circuit board in 3D

    WiFi Gate Controller

    mikelawrence/WiFi-Gate-Controller

    WiFi enabled Gate Controller Addon to US Automatic Gate Opener

    91 parts8MIT
  • 2 layers80 × 90 mmWiFi Septic Controller, the printed circuit board in 3D

    WiFi Septic Controller

    mikelawrence/WiFi-Septic-Controller

    WiFi enabled Septic Controller

    104 parts8MIT
  • 6 layers83.5 × 99.4 mmTAPRx888, the printed circuit board in 3D

    TAPRx888

    TAPR/TAPRx888

    The TAPR rx888 replacement board project

    225 parts6MIT
  • 2 layers39 × 66.5 mmBC250-Power, the printed circuit board in 3D

    BC250-Power

    Needleroozer/bc250-power-board

    Power Distribution PCBs for the BC-250 cards

    39 parts5

Questions

How big is the RFID PCB?

It measures 48.3 × 71.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RFID use?

22 parts, built around the 74LVC2G14GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RFID KiCad files?

From the MilanR312/RFID-IP repository on GitHub, at the commit this page was made from: the board is electronics/RFID/RFID.kicad_pcb and its schematic electronics/RFID/RFID.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RFID design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).