

Motoplygas
A revolution counting jig for variable frequency drive driven pulley system
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 44
- Pads
- 164
- Tracks, vias
- 282, 15
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 2 Apr 2013
- Updated
- 27 Oct 2013
Overview
Motoplygas is an open-source printed circuit board by Miceuz, from the Miceuz/motoplugas repository on GitHub. It is a 2-layer board with 49 parts on 44 nets, routed with 282 tracks and 15 vias.
Its parts include 12 connectors, 10 capacitors, 8 resistors, 4 ICs and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdmotoplugas
A revolution counting jig for variable frequency drive driven pulley system
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R | SM0603 | R1, R2, R3, R4, R5, R6, R10 |
| 6 | C | SM0603_Capa | C1, C2, C4, C5, C6, C8 |
| 4 | Val** | HOLE_30 | HOLE, HOLE, HOLE, HOLE |
| 2 | 18pF | SM0603_Capa | C3, C7 |
| 2 | CAPAPOL | C2V10 | C9, C10 |
| 2 | OPTO-TRANSISTOR_4_PIN | optocoupler-2-DIL04 | U2, U3 |
| 1 | 1206L | ptc-littlefuse-3425L | F1 |
| 1 | 12AC | conn35 | P10 |
| 1 | 16MHz | crystal-HC49/S | X1 |
| 1 | 1k | SM0603 | R7 |
| 1 | 7805 | TO220 | U1 |
| 1 | 94.14.0 | 94.14.0 | RL1 |
| 1 | ATMEGA8-AI | TQFP32 | IC1 |
| 1 | AVR-ISP-6 | atmel-AVR-ISP-6 | CON1 |
| 1 | BRIDGE | Bridge-rond | D1 |
| 1 | DIODE | diode-SMB | D2 |
| 1 | DTSM-6 | switch-tact-DTS-6 | S1 |
| 1 | HALL | conn3_35 | K3 |
| 1 | LED_BOTTOM | PIN_ARRAY_2X1 | P1 |
| 1 | LED_MIDDLE | PIN_ARRAY_2X1 | P2 |
| 1 | LED_TOP | PIN_ARRAY_2X1 | P3 |
| 1 | MCU_MODE | conn35 | P12 |
| 1 | MEDER_DIP051A7212 | DIP-14_RELAY | K2 |
| 1 | MOSFET_N | SOT23GDS | Q3 |
| 1 | POWER_ON | led-CHIP-LED0805 | D3 |
| 1 | PROGRAM_BUTTON | PIN_ARRAY_2X1 | P4 |
| 1 | RLY_ON | connect-CLAMP-02 | P13 |
| 1 | USB_UART | PIN_ARRAY-6X1 | P5 |
| 1 | VFD_1 | conn35 | P9 |
| 1 | VFD_2 | conn3_35 | K6 |
| 1 | down_button | conn35 | P7 |
| 1 | up_button | conn35 | P6 |
Similar boards
- 2 layers173 × 122.5 mm

- 2 layers85.1 × 49.8 mm

- 2 layers50 × 90 mm

- 2 layers126.4 × 15.2 mm

- 2 layers43 × 92.3 mm

DSKY driver
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
49 parts261MIT - 2 layers58 × 110 mm

- 2 layers61 × 42.5 mm

- 2 layers31 × 38 mm

Questions
What parts does the Motoplygas use?
49 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motoplygas KiCad files?
From the Miceuz/motoplugas repository on GitHub, at the commit this page was made from: the board is motoplygas.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motoplygas design in my own project?
Its repository states no licence, so its author keeps all rights: ask Miceuz before reusing the design.