2 layers45.7 × 31.8 mm
LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
36 parts803MIT
2 layers
Irsensor
Miceuz/irsensorSensor array for line following robot
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 28
- Pads
- 90
- Tracks, vias
- 136, 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 15 Dec 2013
- Updated
- 15 Dec 2013
Overview
Irsensor is an open-source printed circuit board by Miceuz, from the Miceuz/irsensor repository on GitHub. It is a 2-layer board with 27 parts on 28 nets, routed with 136 tracks and 1 via.
It is built around the 74HC595. Its parts include 9 resistors, 8 transistors, 7 diodes, 2 ICs and 1 connector.
Main components
1README
README.mdirsensor
Sensor array for line following robot
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | R | SM0603_Resistor | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 8 | OPTO_NPN | LED-3MM | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 7 | LED | LEDV | D1, D2, D3, D4, D5, D6, D7 |
| 1 | 4051 | DIP-16__300 | U1 |
| 1 | 74HC595 | DIP-16__300 | U2 |
| 1 | CONN_5X2 | VASCH5x2 | P1 |
Similar boards
- 2 layers228.6 × 100 mm
Mongus48
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
124 parts335GPL-3.0 - 2 layers245.1 × 160 mm
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers100 × 95.1 mm
Protoboard-6x4-breakout
electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts
4,745 parts311CC-BY-4.0 - 4 layers140 × 100 mm
Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0 - 2 layers100.5 × 218.3 mm
- 2 layers287.8 × 126.7 mm
- 2 layers100 × 100 mm
Questions
What parts does the Irsensor use?
27 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Irsensor KiCad files?
From the Miceuz/irsensor repository on GitHub, at the commit this page was made from: the board is irsensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Irsensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask Miceuz before reusing the design.