
RoverPCB
Meloen2003/SolarRover
Code en PSB design voor het Solar Rover project van hogeschool Zuyd

Code en PSB design voor het Solar Rover project van hogeschool Zuyd
PowerPCB is an open-source printed circuit board by Meloen2003, from the Meloen2003/SolarRover repository on GitHub. It is a 2-layer board of 78 × 70 mm with 30 parts on 16 nets, routed with 61 tracks and 0 vias.
It is built around the BS170. Its parts include 6 connectors, 4 resistors, 3 capacitors, 3 ICs and 3 diodes.
Code en PSB design voor het Solar Rover project van hogeschool Zuyd
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x02_Pin | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J2, J3, J4, J6, J7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2, D5, D6 |
| 3 | C | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3 |
| 3 | ~ | Meloen:LM2596_module_opvoetjes | U1, U2, U3 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4 |
| 2 | BS170 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | Fuse | Meloen:RB500-50 | F1, F2 |
| 1 | Buckboost | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | Buckboost1 |
| 1 | Conn_01x04_Pin | Meloen:Audio jack | J5 |
| 1 | LOGO | Logo:Logo_100x78 | G*** |
| 1 | Supercaps | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | Supercaps1 |

Meloen2003/SolarRover
Code en PSB design voor het Solar Rover project van hogeschool Zuyd

Meloen2003/SolarRover
Code en PSB design voor het Solar Rover project van hogeschool Zuyd




pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard
It measures 78 × 70 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Meloen2003/SolarRover repository on GitHub, at the commit this page was made from: the board is PowerPCB/PowerPCB.kicad_pcb and its schematic Kicad_Solar_Rover_PCB_Energy/Kicad_Solar_Rover_PCB_Energy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Meloen2003 before reusing the design.