Skip to the content
2 layers91.3 × 104.5 mmEnvelope Generator, the printed circuit board in 3D

KiCad schematics and PCB layouts for my modular synth

Size
91.3 × 104.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
71
Nets
50
Pads
203
Tracks, vias
365, 4
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
30 Dec 2021
Updated
26 Apr 2025

Overview

Envelope Generator is an open-source printed circuit board by MatthewATaylor, from the MatthewATaylor/Modular-Synth-Hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 91.3 × 104.5 mm with 71 parts on 50 nets, routed with 365 tracks and 4 vias.

It is built around the TL072 and BC547. Its parts include 25 resistors, 15 capacitors, 9 diodes, 6 connectors and 5 ICs. It belongs with the audio and music boards of this library.

Main components

2

README

Delay/README.md

Delay

A triple PT2399 delay module, including individual and master delay time CV and daisy chaining controls.

Parts

71
QtyValueFootprintReferences
910nCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC103, C104, C105, C106, C107, C108, C109, C110, C201
51N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD201, D202, D203, D204, D205
51kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR209, R309, R310, R311, R312
5AudioJack2_SwitchTConnector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ201, J301, J302, J303, J304
475kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR302, R303, R306, R307
4TL072Package_DIP:DIP-8_W7.62mm_SocketU101, U102, U103, U104
30.1uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC101, C102, C203
3150kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR202, R313, R314
31MPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHolesRV202, RV203, RV204
34.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR204, R206, R207
3BC547Package_TO_SOT_THT:TO-92_InlineQ201, Q202, Q203
2100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR210, R211
210kCustom:Potentiometer_Runtron_RM-065_Vertical_ImprovedRV301, RV302
21N5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD101, D102
247kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR305, R308
2LEDLED_THT:LED_D5.0mmD301, D302
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR205
110kPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHolesRV201
110uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC205
11uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC204
147nCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC202
15.6kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR208
1560kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR203
156kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR201
168kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR301
182kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR304
1Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ101
1ICM7555xPPackage_DIP:DIP-8_W7.62mm_SocketU201
1SW_SPDTSwitch:MTS-102_MTS-103_MTS-112_MTS-113_MTS-123SW202
1SW_SPSTSwitch:PBS-105SW201

More from MatthewATaylor/Modular-Synth-Hardware

12
  • 2 layers192.7 × 104.5 mmDelay, the printed circuit board in 3D

    Delay

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    186 parts11MIT
  • 2 layers323.5 × 104.5 mmController, the printed circuit board in 3D

    Controller

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    162 parts11MIT
  • 2 layers162.2 × 104.5 mmVCO, the printed circuit board in 3D

    VCO

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    151 parts11MIT
  • 2 layers111.4 × 104.5 mmVCF, the printed circuit board in 3D

    VCF

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    133 parts11MIT
  • 2 layers91.3 × 104.5 mmVCA, the printed circuit board in 3D

    VCA

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    80 parts11MIT
  • 2 layers152.3 × 104.5 mmSimplified Controller, the printed circuit board in 3D

    Simplified Controller

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    60 parts11MIT
  • 2 layers80.9 × 104.5 mmSKVCF, the printed circuit board in 3D

    SKVCF

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    54 parts11MIT
  • 2 layers70.8 × 104.5 mmOffset, the printed circuit board in 3D

    Offset

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    51 parts11MIT
  • 2 layers70.8 × 104.5 mmMult, the printed circuit board in 3D

    Mult

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    49 parts11MIT
  • 2 layers380 × 45 mmBus, the printed circuit board in 3D

    Bus

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    32 parts11MIT
  • 2 layers70.8 × 104.5 mmMixer, the printed circuit board in 3D

    Mixer

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    31 parts11MIT
  • 2 layers40.3 × 104.5 mmPower Supply, the printed circuit board in 3D

    Power Supply

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    31 parts11MIT

Similar boards

  • 2 layers105 × 128.5 mmMiniADSR 1.1, the printed circuit board in 3D

    MiniADSR 1.1

    benjiaomodular/MiniADSR

    A 4HP envelope generator for Eurorack modular synth

    52 parts21MIT
  • 2 layers135.8 × 128.4 mmMoog Filter, the printed circuit board in 3D

    Moog Filter

    jojo-monk/Yusynth-MiniMoog-Filter

    Eurorack adaptation

    78 parts8
  • 2 layers76 × 100 mmVclfo10, the printed circuit board in 3D

    Vclfo10

    EchelonForce/vclfo10

    A Eurorack LFO design based on the Electric Druid VCLFO10 chip.

    139 parts7
  • 2 layers67 × 100 mmLfo stomp v1 panelized, the printed circuit board in 3D

    Lfo stomp v1 panelized

    EchelonForce/lfo_stomp

    A design for a Eurorack LFO module based on the ElectricDruid STOMPLFO chip.

    100 parts5
  • 2 layers245.4 × 128.5 mmMOL, the printed circuit board in 3D

    MOL

    juanlittledevil/MOL

    Dual ADSR/VCA combo module for Eurorack

    210 parts4
  • 2 layers30.5 × 99.1 mmMinimoog, the printed circuit board in 3D

    Minimoog

    vk2gpu/eurorack-modules

    Collection of Eurorack module schematics

    74 parts4
  • 2 layers38 × 100 mmVca as3360-circuit, the printed circuit board in 3D

    Vca as3360-circuit

    fledsbo/Modules

    Eurorack module designs using KiCad — VCO, VCF, VCA, ADSR, and Daisy Seed

    74 parts3

Questions

How big is the Envelope Generator PCB?

It measures 91.3 × 104.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Envelope Generator use?

71 parts, built around the TL072 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Envelope Generator KiCad files?

From the MatthewATaylor/Modular-Synth-Hardware repository on GitHub, at the commit this page was made from: the board is Envelope Generator/Envelope Generator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Envelope Generator design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).