Skip to the content
2 layers33.5 × 1.5 mmChronos, the printed circuit board in 3D

Digital wristwatch based on PIC18F microcontroller with DS3232 RTC and SSD1306 OLED display

Size
33.5 × 1.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
54
Pads
87
Tracks, vias
109, 8
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 May 2026
Updated
23 May 2026

Overview

Chronos is an open-source printed circuit board by MatkoKardum, from the MatkoKardum/Chronos repository on GitHub. It is a 2-layer board of 33.5 × 1.5 mm with 9 parts on 54 nets, routed with 109 tracks and 8 vias.

It is built around the DS3232MZ+. Its parts include 5 resistors, 2 ICs and 1 switch. It belongs with the lEDs and displays boards and the PIC boards of this library.

Main components

1

README

README.md

Chronos ⌚

Proteus Simulation

A digital wristwatch built around the PIC18F microcontroller, featuring a real-time clock and OLED display. Developed in C using MPLAB X IDE, with full schematic, PCB layout, and Proteus simulation.


Features

  • Displays time (HH:MM:SS) and date (DD/MM/YY) on a 128×64 OLED screen
  • Uses the DS3232 real-time clock IC for accurate timekeeping (I2C)
  • SSD1306 OLED display driven over I2C
  • Custom low-level I2C driver written from scratch in C
  • Custom OLED driver with character rendering and cursor control
  • Runs at 16 MHz internal oscillator

Hardware

ComponentPart
MicrocontrollerPIC18F (MPLAB X / XC8)
Real-Time ClockDS3232
DisplaySSD1306 128×64 OLED
CommunicationI2C (custom driver)
PCB DesignKiCad
SimulationProteus

Project Structure

text
Chronos/
├── Code/Chronos.X/       # MPLAB X project (C source)
│   ├── main.c            # Main loop – reads RTC, drives display
│   ├── i2c.c / i2c.h     # Custom I2C driver
│   ├── rtc.c / rtc.h     # DS3232 RTC driver
│   ├── oled.c / oled.h   # SSD1306 OLED driver
│   ├── font.h            # Character font bitmap data
│   └── config_bits.h     # PIC18F configuration bits
├── Pcb/Chronos/          # KiCad schematic & PCB layout
├── Simulation/           # Proteus simulation project (.pdsprj)
└── Datasheets/           # DS3232 and SSD1306 datasheets

How It Works

The PIC18F reads time and date registers from the DS3232 RTC chip over I2C every 2 seconds. The BCD-encoded values are decoded and printed character-by-character to the SSD1306 OLED display using a custom font renderer.

text
PIC18F  ──I2C──►  DS3232 (RTC)   reads: hours, minutes, seconds, date, month, year
PIC18F  ──I2C──►  SSD1306 (OLED) writes: formatted time and date strings

Tools Used

  • MPLAB X IDE + XC8 Compiler – firmware development
  • KiCad – schematic capture and PCB layout
  • Proteus – circuit simulation and validation

Status

✅ Firmware complete
✅ Schematic complete
✅ PCB layout complete
⚠️ Physical prototype not yet built (simulation only)


Developed by Matej Kardum – August 2024

Parts

9
QtyValueFootprintReferences
54.7kResistor_SMD:R_0201_0603MetricR1, R2, R3, R4, R5
1CK_KMS2xxGButton_Switch_SMD:SW_SPST_CK_KMS2xxGPSW1
1DS3232MPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1OLED-128O064DDisplay:Adafruit_SSD1306_No_Mounting_HolesDS1
1PIC18F45K50_QFPPackage_QFP:TQFP-44_10x10mm_P0.8mmU1

Similar boards

  • 2 layers70 × 56 mmOrbigator, the printed circuit board in 3D

    Orbigator

    wyolum/orbigator

    Analog orbit propagator.

    61 parts17
  • 4 layers401.3 × 203.2 mmCpu010, the printed circuit board in 3D

    Cpu010

    thorpej/pg68k

    The 68k Playground, a 680x0-based home-brew computer with multiple CPU options

    272 parts15
  • 4 layers91 × 22 mmLC PAMV4b, the printed circuit board in 3D

    LC PAMV4b

    WMXZ-EU/LC-MARE

    low-cost marine acoustic recorder

    74 parts8MIT
  • 4 layers90.2 × 95.9 mmPiridium bus, the printed circuit board in 3D

    Piridium bus

    Alan-JH/piridium-bus

    Flight Computer Board for TJ Cubesat Bus design

    162 parts
  • 4 layers500 × 34 mmPrecision clock, the printed circuit board in 3D

    Precision clock

    Alan-JH/precision-clock

    ECE 362 Final Project

    150 parts
  • 2 layers10.2 × 22.9 mmNewRTC, the printed circuit board in 3D

    NewRTC

    cartheur/M6x09H1-SBC

    A design for a Hitachi HD6309 SBC

    7 partsMIT
  • 4 layers71 × 83 mmStud main, the printed circuit board in 3D

    Stud main

    Dimadeda/Smart-Faculty-

    80 parts

Questions

How big is the Chronos PCB?

It measures 33.5 × 1.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Chronos use?

9 parts, built around the DS3232MZ+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Chronos KiCad files?

From the MatkoKardum/Chronos repository on GitHub, at the commit this page was made from: the board is Pcb/Chronos/Chronos.kicad_pcb and its schematic Pcb/Chronos/Chronos.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Chronos design in my own project?

Its repository states no licence, so its author keeps all rights: ask MatkoKardum before reusing the design.