
Quiver PT3 Main PCB rounded
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

PDB HP LP is an open-source printed circuit board by MatheusPinto, from the MatheusPinto/PI3_IFSC_2024_1 repository on GitHub. It is a 2-layer board of 200 × 165 mm with 92 parts on 118 nets, routed with 561 tracks and 19 vias.
It is built around the F280025CPNS, THL 15-4811WI and XT60PW-F, with the LM1117-3.3 among its other parts. Its parts include 18 resistors, 11 capacitors, 4 ICs, 4 connectors and 3 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12S1, C12S2, C12S3, C12S4, CEG5, CFC3 |
| 4 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12S6, REG12, RFC2, RFC3 |
| 4 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12S4, R12S5, REG10, REG11 |
| 4 | JST_XH | IFSC:Hirose_DF13-03P-1.25DSA_1x03_P1.25mm_Vertical | EscDePartida1, PWM_control_voo1, Reserva1, ServoMotor1 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad_Via | H1, H2, H3, H4 |
| 4 | XT60PW-F | IFSC:AMASS_XT60PW-M | M1, M2, M3, M4 |
| 3 | 10uF | Capacitor_SMD:CP_Elec_6.3x5.4 | C1, C3, CFC2 |
| 3 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | REG5, REG7, REG8 |
| 3 | GREEN | LED_SMD:LED_0805_2012Metric | D1, D2, D3 |
| 3 | JST_XH | IFSC:Hirose_DF13-02P-1.25DSA_1x02_P1.25mm_Vertical | Bomba_12V_1, Ignição1, Temp1 |
| 3 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R6, R7 |
| 3 | TestPoint | IFSC:tp | 12S1, Ibus1, Vbus1 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | CEG3, CEG4 |
| 2 | 12S-N | IFSC:IFSC_TERMINAL_SCREW | J2, J4 |
| 2 | 12S-P | IFSC:IFSC_TERMINAL_SCREW | J3, VBus+ |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | CBAT1, CBAT2 |
| 2 | 22K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | JST_XH5 | IFSC:Hirose_DF13-03P-1.25DSA_1x03_P1.25mm_Vertical | Reserva2, RPM1 |
| 2 | THL_15-4811WI | IFSC:THL154811WI | Conversor_5V_3A1, Conversor_12V1 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | REG3 |
| 1 | 1000 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | REG2 |
| 1 | 100nF | Capacitor_THT:C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 | CFC1 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 100nF | Capacitor_THT:C_Rect_L16.5mm_W6.0mm_P15.00mm_MKT | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RFC1 |
| 1 | 12K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 12V_2 | IFSC:tp | 12V_1 |
| 1 | 1K2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | REG1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | REG9 |
| 1 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | REG6 |
| 1 | 22nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | CEG1 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | REG4 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RFC4 |
| 1 | 330pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | CEG2 |
| 1 | 3V3 | IFSC:tp | 5V3A2 |
| 1 | 3k3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12S3 |
| 1 | 4N35 | Package_DIP:DIP-6_W7.62mm | U1 |
| 1 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12S2 |
| 1 | 56k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12S1 |
| 1 | 5V3A | IFSC:tp | 5V3A1 |
| 1 | 820R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | ACS759xCB-150B-PFF | Sensor_Current:Allegro_CB_PFF | U2 |
| 1 | Alimentação do MCC | IFSC:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | BF244A | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | 5V3-FC1 |
| 1 | F280025C | IFSC:LAUNCHXLF280025C | MCU1 |
| 1 | JST_GHPM | IFSC:BM06BGHSTBTLFSN | 5V2_V_I_GND |
| 1 | JST_XH_PM | IFSC:Hirose_DF13-06P-1.25DSA_1x06_P1.25mm_Vertical | 5V2_V_I_GND |
| 1 | JST_XH_SD | IFSC:Hirose_DF13-06P-1.25DSA_1x06_P1.25mm_Vertical | Modulo_SD_Card1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | UFC1 |
| 1 | LOGO | IFSC:logo | G*** |
| 1 | Opamp_Dual | IFSC:SOIC127P600X175-8N | U3 |
| 1 | Opamp_Quad | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.



WUSTL-Delivery/delivery-robo
colcon build --packages-select serial --cmake-args -DCMAKEPOSITIONINDEPENDENTCODE=ON


ErdemA33/stm32f405-flight-controller
Open-source ArduPilot-compatible flight controller for fixed-wing UAVs. STM32F405, 4-layer KiCad design, built in 5 modular stages.

AdvikChitre/MSL_Imperial_2023
Repository for Imperial College London Robocup MSL team 2023

cjg-1/FPV-RC-CAR
A wireless FPV control system for RC vehicles featuring real-time video transmission and custom embedded power management. Enables immersive first-person vehicle teleoperation with low-latency wireless architecture.
It measures 200 × 165 mm and has 2 copper layers, 1.6 mm thick.
92 parts, built around the F280025CPNS, THL 15-4811WI, XT60PW-F and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MatheusPinto/PI3_IFSC_2024_1 repository on GitHub, at the commit this page was made from: the board is ThaineMartini/projetoPlaca/PDB-HP-LP.kicad_pcb and its schematic ThaineMartini/projetoPlaca/PDB-HP-LP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MatheusPinto before reusing the design.