Marcel-Kitzbichler/OpenMoverPlatformOpenMoverPlatform is an open-source printed circuit board by Marcel-Kitzbichler, from the Marcel-Kitzbichler/OpenMoverPlatform repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 95 × 72.5 mm with 40 parts on 51 nets, routed with 368 tracks and 41 vias.
It is built around the ESP32-S3-WROOM-1-N8 and LM2596S-ADJ. Its parts include 11 connectors, 8 resistors, 6 capacitors, 3 fuses and 2 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 4 | C | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C3, C4, C5, C6 |
| 3 | Fuse | Fuse:Fuse_Blade_Mini_directSolder | F1, F2, F3 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 1 | 3V3_Disconnect | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | 3V3_Disconnect_B | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | JP3 |
| 1 | BLDC1 POWER | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J2 |
| 1 | BLDC1 PWM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | BLDC2 POWER | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J3 |
| 1 | BLDC2 PWM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Boot | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | JP5 |
| 1 | C | Capacitor_SMD:CP_Elec_8x10.5 | C2 |
| 1 | C_Polarized | Capacitor_SMD:CP_Elec_8x10.5 | C1 |
| 1 | D_Schottky | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | GPS_MAG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | I2C_1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | I2C_2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | L | Inductor_SMD:L_Bourns_SRR1260 | L1 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | MOD_SERIAL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Regulator Adj | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | Reset | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | JP4 |
| 1 | SERIAL0 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J11 |
| 1 | battery supply | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
digislateplus/digislateplus.github.io
DigiSlate+ is based on the DigiSlate and is inspired by the DIY timecode generator from mitkunz. The aim for the DigiSlate+ is not only to be able to read and display timecode, but also to generate it itself.
TheEinfachFelix/CampPhone
Warum habe ich mich dagegen entschieden, das Sim Modul selber zu implementieren? Ich habe kein Chip gefunden, der günstiger als das fertige Modul war, und ein Datenblatt in Englischer Sprache hat.
/8-channel_relay/8-channel_relay.kicad_pcb.jpg?size=s&soon)
It measures 95 × 72.5 mm and has 2 copper layers, 1.6 mm thick.
40 parts, built around the ESP32-S3-WROOM-1-N8 and LM2596S-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Marcel-Kitzbichler/OpenMoverPlatform repository on GitHub, at the commit this page was made from: the board is Electrical/OpenMoverPlatform/OpenMoverPlatform.kicad_pcb and its schematic Electrical/OpenMoverPlatform/OpenMoverPlatform.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).